LaserDisc Database https://forum.lddb.com/ |
|
Using Muse output for normal LD https://forum.lddb.com/viewtopic.php?f=14&t=6078 |
Page 1 of 1 |
Author: | mimylovesjapan [ 16 Feb 2016, 13:12 ] |
Post subject: | Using Muse output for normal LD |
Is it possible ? To watch normal LD on HLD-X0 or X9 by muse output ? If yes, is the quality better ? |
Author: | samaron [ 16 Feb 2016, 13:27 ] |
Post subject: | Re: Using Muse output for normal LD |
This probably answers your question. I have the Pioneer HLD-X9 with Sony MSC-4000 MUSE decoder. I'm not good at Japanese, but I think "MUSE dewa arimasen" means "This is not MUSE". |
Author: | mimylovesjapan [ 17 Feb 2016, 00:01 ] |
Post subject: | Re: Using Muse output for normal LD |
Yes ! It means that is is not a muse disc. Too bad ! Thank you ! |
Author: | publius [ 17 Feb 2016, 01:24 ] |
Post subject: | Re: Using Muse output for normal LD |
The MUSE output passes the MUSE signal from Hi-Vision LDs. If you play a NTSC disc, you will get a MUSE signal generated within the player, typically a black or blue screen, telling you that you have the wrong output for the disc type. The NTSC output, likewise, when you play a MUSE disc, will show a similar error-message screen. |
Author: | mimylovesjapan [ 17 Feb 2016, 11:57 ] |
Post subject: | Re: Using Muse output for normal LD |
thank you for explaination ! |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |