LaserDisc Database https://forum.lddb.com/ |
|
Pioneer DVL-919 no color https://forum.lddb.com/viewtopic.php?f=23&t=2176 |
Page 1 of 1 |
Author: | Guest [ 05 Jan 2013, 06:11 ] |
Post subject: | Pioneer DVL-919 no color |
Some times no color from LD on start of LD or will go to black & white while playing, or vise versa but DVD 's color OK all the time (not that I watch DVD's on the 919 Have Sony NS-1000 for DVD), another question have another DVL-919 that doesn't play who repairs in Los Angeles, CA area or any where? 2nd machine I let sit now doesn't play, tray opens/closes OK however! |
Author: | publius [ 05 Jan 2013, 07:25 ] |
Post subject: | Re: Pioneer DVL-919 no color |
Does this happen on both Composite & S-Video, or only one or the other? |
Author: | hippiedalek [ 05 Jan 2013, 14:29 ] |
Post subject: | Re: Pioneer DVL-919 no color |
I'm in PAL land and sometimes get black and white from NTSC discs when I connect my DVL 919E to the TV via s-video. Which connections and disc types are you using? Could it be something similar? Also does the US version of the 919 have the PAL/NTSC switch on the back? It could be set wrong. |
Author: | cpix [ 05 Jan 2013, 16:27 ] |
Post subject: | Re: Pioneer DVL-919 no color |
hippiedalek wrote: I'm in PAL land and sometimes get black and white from NTSC discs when I connect my DVL 919E to the TV via s-video. Which connections and disc types are you using? Could it be something similar? Also does the US version of the 919 have the PAL/NTSC switch on the back? It could be set wrong. No, the US dvl is only for ntsc. but it sounds like your tv doesn't support ntsc :/ (or you could be using the wrong channel on your TV, usually one of the AV Channels are sharing a channel for both composite and svideo, so try all your channels, if you still only get black and white, it's probably your tv not supporting ntsc. - pix |
Author: | nissling [ 05 Jan 2013, 17:12 ] |
Post subject: | Re: Pioneer DVL-919 no color |
cpix wrote: No, the US dvl is only for ntsc. Is there even any LD-player from the Us that supports PAL? |
Author: | rixrex [ 05 Jan 2013, 17:35 ] |
Post subject: | Re: Pioneer DVL-919 no color |
No, no LD player actually made for US market with PAL included. All Pal players or combos in the US now came from elsewhere. I suppose one could have been special ordered. I have seen folks using a DVL 909 or 919 that had one of the component outputs plugged into the composite TV input and hence only got B&W, in particular, from the luminence signal. |
Author: | gumbyandpals [ 05 Jan 2013, 17:55 ] |
Post subject: | Re: Pioneer DVL-919 no color |
You could also get B&W if you have both composite and s-video plugged into the same set of input jacks. Most TVs don't allow both, it's one or the other. |
Author: | rein-o [ 05 Jan 2013, 18:12 ] |
Post subject: | Re: Pioneer DVL-919 no color |
alright i'm going to try one also. i don't have this player at all. BUT i know when i have my TV hooked up with my DVD player in component and don't have it on Video 2-C i will get the correct image if i have it on Video 2 it will be black and white. so is it possible that you have it on the wrong setting on your TV or receiver? |
Author: | Guest [ 06 Jan 2013, 04:18 ] |
Post subject: | Re: Pioneer DVL-919 no color |
Thanks all! Found the S Video cable was bad at connector (Monster Cable) shaked and twisted slightly than color would come and go. Replaced cable now OK with slight twisting/shaking just in case player connection was no good. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |