|
It is currently 26 Apr 2024, 14:58
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
monetri
|
Post subject: Slipping discs/spindle on Pioneer Posted: 14 Mar 2016, 15:53 |
Genuinely interested |
|
|
Joined: 11 Mar 2016, 12:31 Posts: 37 Location: Croatia Has thanked: 0 time Been thanked: 0 time
|
https://www.youtube.com/watch?v=RE1h8Z1NdjoI made this short clip today. According to the web i realized its the common issue. I cleaned up upper spindle and motor rubber too. Actually, it is not a real rubber what i noticed but it looks the same like all spindle rubber over the web. That not helped much. Also, that "rubber" is not detachable from the spindle and im not clear what it means when people suggest to change the ring/rubber. Otherwise the player works great, its only that issue which follows to open and changing sides not to operate as it should and the disc sometimes starting to wildly rotates on too much speed that laser gives up to track (when reaching the end of the side A, slowest speed, then turning to other direction leads to nowhere...) Should i glue some old belt to the motor spindle rubber area or there is some more elegant solution? Thanks!
|
|
|
|
|
tony426
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 15 Mar 2016, 02:36 |
Honest fan |
|
|
Joined: 04 Mar 2013, 02:10 Posts: 69 Location: United Kingdom Has thanked: 8 times Been thanked: 0 time
|
monetri wrote: So that ring could really be peeled of off the spindle? It seemed to me like an one pieced part. Ill try it again when i open it.
This picture shows how easily the ring can be removed:
|
|
|
|
|
rein-o
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 15 Mar 2016, 05:20 |
Jedi Master |
|
|
Joined: 03 May 2004, 19:05 Posts: 8106 Location: Dullaware Has thanked: 1219 times Been thanked: 844 times
|
Yes, it's very thin, I don't know if someone can buy rubber that thin to make a replacement??? I believe its only something you buy already made. ________________________________ the rein-o official signature:
|
|
|
|
|
monetri
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 15 Mar 2016, 18:26 |
Genuinely interested |
|
|
Joined: 11 Mar 2016, 12:31 Posts: 37 Location: Croatia Has thanked: 0 time Been thanked: 0 time
|
That's what i wanted to know. So it is only mostly important that the new non slip layer is about the same thikness as the old one and that it has a nice grip The rest of the case is a DIY only xD btw, today i was watching two discs, 4 sides and non a single slip at all! Obviously it depends about the discs too, their labels or i dont know It was working like a charm! Another issue happened but its not for this topic. Thank you!
|
|
|
|
|
monetri
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 19 Mar 2016, 12:32 |
Genuinely interested |
|
|
Joined: 11 Mar 2016, 12:31 Posts: 37 Location: Croatia Has thanked: 0 time Been thanked: 0 time
|
krbahr wrote: CLD-53/79/99, CLD-D503/703/704 all use the VEB1237, There are also a few Japanese/European models based of these like the CLD-D99,CLD-HF7G/HF9G to name a few that use the same pad. ....including D570 too
|
|
|
|
|
Guest
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 26 Mar 2016, 01:18 |
|
monetri wrote: Just ordered one famous VEB1237 Thank you Krbahr gde si narucio this anti slipping seal ring? from european webshop or where? VEB1237 does it fit several players like Pioneer DVL-909 and R7G players
|
|
|
|
|
monetri
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 26 Mar 2016, 10:44 |
Genuinely interested |
|
|
Joined: 11 Mar 2016, 12:31 Posts: 37 Location: Croatia Has thanked: 0 time Been thanked: 0 time
|
carlosthejackal wrote: monetri wrote: Just ordered one famous VEB1237 Thank you Krbahr gde si narucio this anti slipping seal ring? from european webshop or where? VEB1237 does it fit several players like Pioneer DVL-909 and R7G players Try to contact member krbahr and take a look on this topic http://forum.lddb.com/viewtopic.php?f=30&t=1710 It seems like slightly different part but it can be used.
|
|
|
|
|
Guest
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 26 Mar 2016, 12:47 |
|
|
|
|
|
monetri
|
Post subject: Re: Slipping discs/spindle on Pioneer Posted: 11 Apr 2016, 09:16 |
Genuinely interested |
|
|
Joined: 11 Mar 2016, 12:31 Posts: 37 Location: Croatia Has thanked: 0 time Been thanked: 0 time
|
I just want to let you Know that the rubber arrived 7 days ago but i was away untill yesterday. I have to say that i couldnt wait to install it I could really peel off the old rubber, clean the surface with an alcohol and carefully put the new one. The First thing that i tried was to test the most slippery disc and it was working like a charm! I must admit thar in all that excitment i forgot to install back the spindle spring and the center part up to that spring but even withput it the disc didnt do even a single slip and stopping the disc was like never before. Now my D570 is in perfect working order @krbahr thanks!
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|