LaserDisc Database
https://forum.lddb.com/

MSC-3000/4000 remote control HEX CODES help
https://forum.lddb.com/viewtopic.php?f=25&t=4033
Page 1 of 1

Author:  substance [ 19 Apr 2014, 21:30 ]
Post subject:  MSC-3000/4000 remote control HEX CODES help

anyone have or have the ability to retrieve HEX codes for the remote control commands? I only have one source hooked up to it so all I need is "power on" and "power off" discrete commands or worst case "power/standby" if they are available.

If I can't get these codes, another option can be trying codes from other Sony devices which might match. I have a vast database of codes for most Sony products but MUSE decoders. Any suggestion to which device codes should I try?

Author:  rchiffelle [ 22 Apr 2014, 05:25 ]
Post subject:  Re: MSC-3000/4000 remote control HEX CODES help

I have a Harmony 1 that has all the codes manually entered from the remote. I know how to get HEX codes into the remote, but not out. If there is a way, I'd be happy to provide HEX codes to you. I haven't done much in this area, but if you have the remote, you should be able to get some IR hardware and software that reads it?

Author:  substance [ 22 Apr 2014, 18:44 ]
Post subject:  Re: MSC-3000/4000 remote control HEX CODES help

I don't have the original remote. Santini didn't send one. He won't sell me one. For now all I need is power on and power off but later if I add another MUSE player, I will need input buttons too. Do you know if there is discrete power on and power off buttons? or its just a power toggle?

Author:  publius [ 04 May 2014, 20:28 ]
Post subject:  Re: MSC-3000/4000 remote control HEX CODES help

My user guide shows you the remote control with its functions.
I sorted out the control codes for the MST-2000, by bit-banging the rear-panel "Control-S" jack, but haven't yet bothered to do the 3000/4000. As an advisory, I can tell you that the 2000 model has three "power" commands : discrete on, discrete off, & 'toggle'. The remote control only uses the 'toggle' code. The same is probably true of the 3000/4000.

Author:  substance [ 05 May 2014, 03:20 ]
Post subject:  Re: MSC-3000/4000 remote control HEX CODES help

this is very good to know. Do you think mst-2000 commands would work?
Do you mind sending me the complete HEX codes for discrete on and off and maybe input 1 and 2?

Author:  publius [ 05 May 2014, 07:50 ]
Post subject:  Re: MSC-3000/4000 remote control HEX CODES help

I know the MST-2000 codes do not work for the MSC-3/4000. I think this is because the model ID code is different. The actual command codes should be the same, & you can get them from my MST-2000 guide.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/