It is currently 12 Dec 2018, 00:07




 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: CLD-V2400 tries to start for 10 seconds and then stops
PostPosted: 03 Oct 2018, 03:01 
First post
First post
User avatar

Joined: 03 Oct 2018, 02:52
Posts: 1
Location: United States
Has thanked: 0 time
Been thanked: 0 time
I just got a CLD-V2400 that has a couple problems. The first problem is that when starting up a disc, the disc set light comes on correctly, but then when trying to play the disc, it spins up for about 10 seconds and then stops. The Play light flashes during this time.

The door also needs gentle help opening when ejecting a disc, but it seems to close OK. I don't know if these are related. The discs were slipping off the spindle until I cleaned the spindle face. Does anyone have any ideas? Thanks!
Offline
 Profile  
 
 Post subject: Re: CLD-V2400 tries to start for 10 seconds and then stops
PostPosted: 03 Oct 2018, 05:00 
Serious fan
Serious fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 212
Location: San Francisco, CA USA
Has thanked: 8 times
Been thanked: 23 times
Seems that I answer this question way too often. So let me try to give a general answer on LD player issues.


When players have oddball issues like not spinning up discs (but can identify them), have loading / unloading issues, doesn't go to Side B (on an auto reverse player), etc.; the issues are going to be a stretched loading belt about 80% to 90% of the time.

To test the theory that it is the belt, you can clean it with alcohol to remove possible contaminates (residual grease or just dirt) and see if the issue "improves". If it makes a slight difference, then one can assume the belt is the main culprit and ordering a new belt will fix the issue.


Other issues like the player having a whiny noise, taking forever to eject a disc (because the player is waiting for the disc to stop spinning), etc.; is usually indicative of a dirty disc clamper that can usually be cleaned w/ alcohol but in some cases may need the rubber mat on it replaced (or recoated).


So those are the first steps, IMHO, to take whenever one acquires a player that has a history of moderate use. ;) (If it's a player that has been used a lot and abused, could be all those things I mentioned and a whole lot more.)
Online
 Profile  
 
 Post subject: Re: CLD-V2400 tries to start for 10 seconds and then stops
PostPosted: 03 Oct 2018, 14:55 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 5009
Location: United States
Has thanked: 23 times
Been thanked: 59 times
ldfan wrote:
Seems that I answer this question way too often. So let me try to give a general answer on LD player issues.



You only feel this now HAHAHAHAHAHAHAHAHA

This type of thing has been going on for the past 3 years.

How do I fix my slipping etc. :crazy: :crazy: :crazy: :cry: :cry: :cry:
Offline
 Profile  
 
 Post subject: Re: CLD-V2400 tries to start for 10 seconds and then stops
PostPosted: 03 Oct 2018, 19:10 
Serious fan
Serious fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 212
Location: San Francisco, CA USA
Has thanked: 8 times
Been thanked: 23 times
rein-o wrote:
You only feel this now HAHAHAHAHAHAHAHAHA

This type of thing has been going on for the past 3 years.




Well.... I was away for awhile and even back when I joined I wasn't really that active on the forum.

So I guess I must have missed a lot. ;)
Online
 Profile  
 
 Post subject: Re: CLD-V2400 tries to start for 10 seconds and then stops
PostPosted: 03 Oct 2018, 19:26 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 5009
Location: United States
Has thanked: 23 times
Been thanked: 59 times
No matter, glad you are here.
Offline
 Profile  
 
 Post subject: Re: CLD-V2400 tries to start for 10 seconds and then stops
PostPosted: 09 Oct 2018, 20:55 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 719
Location: United States
Has thanked: 0 time
Been thanked: 20 times
I think the drawer issue is the loading belt. You can try a CD or an 8" LD in the player to see of these play. These discs are light enough to not typically be effected by spindle slip. If either of these discs play, then you're looking at the spindle rubber mat. If they don't play, you will likely have a more serious problem, including alignment issues or even a faulty pickup. When you have the bonnet off, could you see the pickup move back and forth when the tray is closed without a disc?
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: cplusplus, ldfan and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: