It is currently 29 Mar 2024, 11:00




 Page 1 of 1 [ 18 posts ] 
Author Message
 Post subject: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 29 Oct 2014, 20:07 
Third post and above
Third post and above
User avatar

Joined: 03 Sep 2003, 21:01
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 0 time
Hello All,

I recently picked up an iScan VP50 (not the PRO) recently online. (Amazing how cheap this stuff is now)

Currently, I have a Panasonic DMR-E50 that I had been using to port my CLD-D704 to a Panasonic Plasma HDTV.

CLD-D704 (composite) -> DMR-E50 (component) -> Plasma TV

With the new scaler, I am assuming this will be much improved over the above, but I'm questioning whether I should keep the DVD recorder in play given the superior (?) comb filter. Something like this ~

CLD-D704 (composite) -> DMR-E50 (component) -> iScan VP50 (HDMI) -> Plasma TV

Or should I pull the DMR-E50 out of the loop and go ~

CLD-D704 (composite) -> iScan VP50 (HDMI) -> Plasma TV

Or is this perhaps a trial and see approach? I think the expertise exists here on the board to answer the above as I have seen similar threads in the past. A definitive answer would be appreciated.
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 29 Oct 2014, 20:17 
Absolute fan
Absolute fan
User avatar

Joined: 24 Jun 2010, 10:23
Posts: 1645
Location: Sweden
Has thanked: 11 times
Been thanked: 79 times
I think if you go through the DMR-E50 for comb filtering and then to the iScan VP50 for deinterlacing and scaling you'll get the best possible results with your current setup. The DVDO-units aren't well known for good comb filters but some DVD recorders have very good ones (and underwhelming scaling/deinterlacing). But my suggestion is that you just try out different combinations and settings to see whatever looks the best.
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 29 Oct 2014, 22:40 
Young Padawan
Young Padawan
User avatar

Joined: 16 May 2009, 18:05
Posts: 3569
Location: California, USA
Has thanked: 26 times
Been thanked: 314 times
Dvdo vp50 has a Philips 2D comb filter(4 line). I think 704 has a 3 line so its an improvement from 704. Try the e50 it will probably comb bettet but you will have vp50 digitize the component input. Dvdo products have strong analog filters sometimes results too digitized picture. It would best if you had a hdmi out dvd recorder.
_________________
Coming Soon
Derman Labs
Anything Of Substance
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 08 Dec 2014, 18:14 
Third post and above
Third post and above
User avatar

Joined: 03 Sep 2003, 21:01
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 0 time
substance wrote:
Dvdo vp50 has a Philips 2D comb filter(4 line). I think 704 has a 3 line so its an improvement from 704. Try the e50 it will probably comb better but you will have vp50 digitize the component input. Dvdo products have strong analog filters sometimes results too digitized picture. It would best if you had a hdmi out dvd recorder.


Yes, the picture does seem over-digitized (grainy) going ~

CLD-D704 (composite) -> DMR-E50 (component) -> iScan VP50 (HDMI) -> Plasma TV

So, would an inexpensive HDMI-out Panasonic DVD recorder (like the EZ27 or EZ28) really make a difference?

CLD-D704 (composite) -> DMR-EZ27 (HDMI) -> iScan VP50 (HDMI) -> Plasma TV

I appreciate the help.
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 16 Dec 2014, 18:35 
Third post and above
Third post and above
User avatar

Joined: 03 Sep 2003, 21:01
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 0 time
Ok, so I picked up a DVD recorder with HDMI out and I'm confused on the settings. Should I output from the DVD recorder in 480p 4:3 and let the iScan do the scaling?
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 16 Dec 2014, 23:40 
Advanced fan
Advanced fan
User avatar

Joined: 02 Oct 2008, 04:35
Posts: 565
Location: Minnesota, United States
Has thanked: 0 time
Been thanked: 2 times
480i into the VP50 if possible and let that do the scaling. Deinterlacing in the VP50 is going to be superior to any DVD recorder.
_________________
Laserdisc Player
CLD-3080 w/ AC-3
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 16 Dec 2014, 23:49 
Third post and above
Third post and above
User avatar

Joined: 03 Sep 2003, 21:01
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 0 time
gumbyandpals wrote:
480i into the VP50 if possible and let that do the scaling. Deinterlacing in the VP50 is going to be superior to any DVD recorder.


Thank you very much!
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 13 Apr 2020, 18:42 
Honest fan
Honest fan
User avatar

Joined: 14 Oct 2018, 19:58
Posts: 90
Location: Japan
Has thanked: 18 times
Been thanked: 18 times
I get new equipment

DVDO iSCAN VP50 (not Pro) $200

Pioneer PDP-4280 Plasma (1024x768) $ 150

Obtained plasma with poor resolution for LD

Has KRP-500 (Full HD plasma)

Think LD is not the best in Full HD

I got the VP50 because I let go of iSCAN DUO

Is the final firmware for the VP50 available now?

What do you think of the combination of VP50 and PDP-4280?

Do you think you will succeed?

Or do you have a File?
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 14 Apr 2020, 08:14 
Absolute fan
Absolute fan
User avatar

Joined: 01 May 2016, 06:38
Posts: 2040
Location: Australia
Has thanked: 334 times
Been thanked: 222 times
Sorry, I have no idea all I know is my own setup.

I love my VP-50. It switches sources and adjusts aspect ratios/overscans/underscans like a dream. Got it 5 years ago and just had to change out the PSU once to keep it running. I believe my KV-HR36 Wide CRT in Super Fine Pitch mode does all the heavy lifting when it comes to the picture quality, which I'm extremely satisfied with:

LD player (composite) -> VP-50 (RGBHV) -> KV-HR36M31 (SUPER FINE PITCH) -> my eyes

I like Groo too

and good luck PowerofLD
_________________
SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 14 Apr 2020, 09:03 
Honest fan
Honest fan
User avatar

Joined: 14 Oct 2018, 19:58
Posts: 90
Location: Japan
Has thanked: 18 times
Been thanked: 18 times
thank you for contacting

I will buy in the future.
I'm looking for SUPER FINE PITCH

SONY SUPER FINE PITCH WEGA CRT

Is SUPER FINE PITCH compatible with LD?

Or is the normal FD Trinitron good?

forper wrote:
Sorry, I have no idea all I know is my own setup.

I love my VP-50. It switches sources and adjusts aspect ratios/overscans/underscans like a dream. Got it 5 years ago and just had to change out the PSU once to keep it running. I believe my KV-HR36 Wide CRT in Super Fine Pitch mode does all the heavy lifting when it comes to the picture quality, which I'm extremely satisfied with:

LD player (composite) -> VP-50 (RGBHV) -> KV-HR36M31 (SUPER FINE PITCH) -> my eyes

I like Groo too

and good luck PowerofLD
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 16 Apr 2020, 00:41 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1512
Has thanked: 443 times
Been thanked: 584 times
Super Fine Pitch = 1440x1080i
Hi-Scan = 853x1080i
The rest are 480i.

My Hi-Scan looks better than my Super Fine Pitch right now because it doesn't have convergence issues. I need to take the time to tweak both to see the difference in picture quality.
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 16 Apr 2020, 09:15 
Absolute fan
Absolute fan
User avatar

Joined: 01 May 2016, 06:38
Posts: 2040
Location: Australia
Has thanked: 334 times
Been thanked: 222 times
I think that LD on my setup looks very good with Super Fine Pitch turned on, worse with it off. That's all I know, I'm not a science guy.
_________________
SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 17 Apr 2020, 01:41 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1512
Has thanked: 443 times
Been thanked: 584 times
My SFP CRT is just a special case. It wasn't treated well, had been used heavily and has had multiple owners. I had been looking for one for so long that when I saw this I jumped on it immediately even though I should have passed this one up. In addition to the convergence being way off, I've already replaced a part on it and I think I need to replace a capacitor somewhere because I'm getting some weird horizontal distortion in the picture.

The geometry on my Hi-Scan CRT is a little off, but I purchased it from the original owner who took good care of it.

I just need to find the time to get them back into shape. Most of it can be done through the service menu.
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 17 Apr 2020, 10:06 
Honest fan
Honest fan
User avatar

Joined: 14 Oct 2018, 19:58
Posts: 90
Location: Japan
Has thanked: 18 times
Been thanked: 18 times
Research until VP50 arrives

I tried connecting SONY DSC-1024HD

1・
LD-S1 or CLD-99 →(RCA)  DSC-1024HD →(D-SUB 15PIN to PC input) PDP-4280 (Full pixels 1024x768)
result
The image did not look sharp but looked blurry.

2・
LD-S1 or CLD-99 →(RCA)  PDP-4280(Full pixels 1024x768)
result
Looks sharper than 1・
I think the 4280 YC separation has high performance
Or image processing is good

I used to own the KRP-500
It was FULL HD.

I feel that 4280 is more suitable for LD than KRP-500

I think the reason is because Full pixels 1024x768


Attachments:
i-img588x829-1587036202w9edq430104.jpg
i-img588x829-1587036202w9edq430104.jpg [ 85.7 KiB | Viewed 2743 times ]
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 17 Apr 2020, 10:53 
Absolute fan
Absolute fan
User avatar

Joined: 01 May 2016, 06:38
Posts: 2040
Location: Australia
Has thanked: 334 times
Been thanked: 222 times
I have one of those 1024HDs coz i thought it might work as a genlock for subs and it was cheap. But I was foolish and it didn't work at all and I ended up with a TVOne unit. I still hang on to the Sony in case I get a projector when my CRT dies. For some reason I think the 1024 HD will be useful for a projector setup> I can't remember if it will actually be useful, drinking too much...
_________________
SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 17 Apr 2020, 11:20 
Honest fan
Honest fan
User avatar

Joined: 14 Oct 2018, 19:58
Posts: 90
Location: Japan
Has thanked: 18 times
Been thanked: 18 times
It is a pity that the output is only D-SUB (VGA).

You can try the projector from VGA to component conversion

But it's possible with VP50
DSC-1024 will be used less frequently

Since the DSC-1024 has a line doubler function,
I will keep it for that.

But TBC is also essential for the line doubler to work
(The upper part of the screen shakes only with the line doubler)

The device was sold for $ 6000 in 2000,
Now it's lacking in performance
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 18 Apr 2020, 08:36 
Absolute fan
Absolute fan
User avatar

Joined: 01 May 2016, 06:38
Posts: 2040
Location: Australia
Has thanked: 334 times
Been thanked: 222 times
Good info power of LD. Yeah all I know is that line doubler is what you need for old projectors and it might come in handy, maybe out to the VP50 or in conjunction with a TBC. Yeah to work as a genlock I think it needed a black burst generator or something..

This stuff goes over my head and hurts my brain until it's in front of me and I can trial and error test everything..Even manuals and stuff aren't always clear to a dumb-brain like me. Oh well at least I got the 1024HD for $100 instead of $6000!
_________________
SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
Offline
 Profile  
 
 Post subject: Re: Advice needed on hookup - DVD Recorder + iScan VP50
PostPosted: 18 Apr 2020, 10:15 
Honest fan
Honest fan
User avatar

Joined: 14 Oct 2018, 19:58
Posts: 90
Location: Japan
Has thanked: 18 times
Been thanked: 18 times
I agree. DSC-1024HD was cheap
$ 10 + shipping (lol

LDP → DSC (line doubler) → 4280 monitor
This is described in the DSC manual, but the top of the screen shakes

To use the line doubler
LDP → TBC → DSC (line doubler) → VP50 → 4280 monitor

I buy a device with 3dYC & TBC & frame synchronizer built in (looking forward)

There is also an opinion that the frame synchronizer is more important than TBC for LD.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 18 posts ] 


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: