I would like to use both of my players, DVL 909 and a CLD D704 in my HT. Is their a switcher I could use so that I don't have to swap cables?

Good day Laminarflow,

Laserdisc to analogue to digital Switcher 5 x inputs component / composite x 2 not sure what others but all of these are converted to HDMI out to your screen AV Amp....... Cost on inquiry was around £170.00 and I shall be purchasing 2 of these when funds allow.

I shall find out more at some stage towards the end of 2016.

Did you manage to find what you were looking for similar product.


Kind Regards

I use a Sony SDP-E800 digital processor. It has 4 A/V inputs: digital 1 is composite video, digital sound and AC-3 inputs, digital 2 is composite video and digital sound, digital 3 input is digital sound only. The 4'th input is for composite video and analog audio. What you want to do is use Digital 1 and Digital 2 inputs for your 2 LD sources. The digital sound I am referring to is a toslink connector for fiber optic cables.

There is a SDP-E800 for sale on E-bay for ~$46.00 pluc $20.00 shipping.

Hope this helps.

Get a DVD recorder with a 3D comb filter. Those usually have two inputs and you can switch that way!

Two birds with one stone!

Or just something like this . . .

3-port A/V Selector

My favorite is the Audio Authority 1154B. Allows you to share up to 4 LD players with one AC3 demodulator, and/or one DVD-R.

https://www.audioauthority.com/product_details/1154B


Troll e-bay until you can find one for ~$50. The remote is nice but not necessary, so don't worry if it is missing.

I'm sorry, how do you get a GBR video signal out of an LD player?

You should be able to hook up composite to the Y-channel (green), been so on other devices with component I've used.

Oh really? Didn't know that.

I should have mentioned that there isn't any processing being done within the box, so those GBR connectors can be used to switch between any RCA style cable that you plug in. Use 'em for composite, AC-3 RF, etc.