| LaserDisc Database https://forum.lddb.com/ |
|
| DVDO iscan VP20 is unresponsive https://forum.lddb.com/viewtopic.php?f=50&t=8003 |
Page 1 of 1 |
| Author: | therussian [ 25 Aug 2018, 09:32 ] |
| Post subject: | DVDO iscan VP20 is unresponsive |
Guys red alert, please advice. I decided to turn on a laserdisc this morning, I switched on my DVDO VP20. And suddenly all it does is: Display on the device comes on ( it't displays model name ) then my screen flickers a bit and goed black, and DVDO is unresponsive. I already tried a different power supply ( I actually have a correct spare ) and nothing. DVDO's display also turns off and the only light that is during is the red one.  Did anyone had something like this ? |
|
| Author: | therussian [ 25 Aug 2018, 09:46 ] |
| Post subject: | Re: DVDO iscan VP20 is unresponsive |
I already did a hard reset ( menu & exit button ) after the reset I am stuck at a blue screen and no response at all. |
|
| Author: | forper [ 26 Aug 2018, 10:38 ] |
| Post subject: | Re: DVDO iscan VP20 is unresponsive |
Sinpro PSUs? I had issues with generic PSUs on my VP50 until I switched to a Sinpro. |
|
| Author: | gypsy [ 28 Aug 2018, 13:07 ] |
| Post subject: | Re: DVDO iscan VP20 is unresponsive |
Have you looked at the inside of the unit yet? If not I would recommend doing that. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|