Ok, thank you !
It is because of my capture card. I don't know why, by the screen is not perfectly in the center.
I will use manual crop, then, if there is no "Horizontal shift" command.
Thank you !
I will ask more question in the next days
| LaserDisc Database https://forum.lddb.com/ |
|
| Lumagen 2144/2124 move screen horizontaly [solved] https://forum.lddb.com/viewtopic.php?f=51&t=8065 |
Page 1 of 1 |
| Author: | mimylovesjapan [ 24 Oct 2018, 10:29 ] |
| Post subject: | Lumagen 2144/2124 move screen horizontaly [solved] |
Hello everyone ! I found an option to move the image vertically (vertical shift), but not horizontally. Someone can help me ? |
|
| Author: | audioboyz1973 [ 25 Oct 2018, 03:13 ] |
| Post subject: | Re: Lumagen 2144/2124 move screen horizontaly |
Hi mimy, To get the best fit of the incoming image to the screen you should use the 'Crop TopLeft' and 'Crop BotRight' controls. I only use the 'Vert Shift" to shift the image with scope material (2.35:1, 2.2:1 etc) to the bottom of 16:9 projector screen. This just works better for me as the screen is relatively high and the image is in a better position for viewing and in relation to the front speakers that way. It just looks better too having a single wider blank bar at the top rather than narrower ones top and bottom, in which case I find the bottom one distracting when viewing. It looks better too having the image framed by the screens black borders on the bottom as well as the sides (I'm not fancy enough to have a screen with blanking panels!) This also has the added bonus of screening out the Japanese subtitles (which I don't need) on those discs. If the Crop settings are correct I'm not sure why you'd even want/need to shift the image horizontally. |
|
| Author: | mimylovesjapan [ 25 Oct 2018, 07:20 ] |
| Post subject: | Re: Lumagen 2144/2124 move screen horizontaly |
Ok, thank you ! It is because of my capture card. I don't know why, by the screen is not perfectly in the center. I will use manual crop, then, if there is no "Horizontal shift" command. Thank you ! I will ask more question in the next days
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|