carrboroman wrote:
forgot about this:
btw, I tried looking around, but couldn't find a place selling the brown geared belt which I think is shared with other models:
picture
just thinking ahead, are these relatively easy to find?
Thanks!
Honestly speaking, I have never had to research a replacement for these types of belts because I think the teeth act as a way to prevent the common slipping issue found on the belts without teeth. For example, I have owned a CLD-3030 from day one back in 1988 and it's still on its original belt that uses the teeth style.
In any case, it appears that the part number for this belt is VEB-1069 (Synchro Belt) and it is available at PacParts and Instrumental Parts if you want to order one....
https://www.pacparts.com/part.cfm?part_ ... fg=Pioneer https://instrumentalparts.com/belt-synchro-veb1069/If you think that might be too expensive, not sure if these can work but it's worth some researching....
https://www.sewingpart.com/category-s/4069.htmThese are sewing machine belts and they "might" have the same width and if so you just need to measure out the proper diameter for your belt.
Ive contacted the Sewing Machine Co listed,the belt seller says they dont have it..Further internet searched came up with nothing…it looks like the minimum belt length is about 8’…the VEB1069 is approx 5 5/8- 3/4 ….anyone have other info ,please post it.