|
It is currently 24 Apr 2024, 10:55
|
View unsolved topics | View unanswered posts
| Author |
Message |
Jump to forum Jump to topic |
| krbahr |
|
Posted: 21 May 2020, 23:47
|
|
|
As others stated D105 shorts and blows the fuse if an arc occurs, the problem is Pioneer chose a ARC suppressor with too low of an rating and it can blow by just plugging the unit into an outlet. So you can just cut one of the leads so it does not make contact or cut both leads and remove it. The replace the fuse with another with the same ratings, they should on printed on the board by the fuse.
There is nothing special about this type of ARC suppression, that is why you can just buy a arc suppression outlet adapter or power strip to get the arc suppression.
Kurtis |
|
 |
Jump to forum Jump to topic |
| ldfan |
|
Posted: 27 May 2020, 07:15
|
|
|
.. anyways, it seems to me like this would work? Just adding the TOSLINK plug? Maybe there's a cap (C895) right there missing?
The empty toslink cutout could work if you can verify that the power and signal connections actually still go there. If you have a voltmeter set on continuity mode, you can follow the digital out back to the DSP chip as follows....
https://i.vgy.me/mzN8WB.png
If you follow it carefully, it should end up @ pin 43.
https://i.vgy.me/PSJVSd.png
Anybody else every add a optical out to any of these? Or any I just wasting my time on a perfectly PRISTINE working machine.
It's very doable. I'm still working on adding one to my CLD-M90. I plan on using this kit to make it happen....
https://i.vgy.me/zhKnGz.jpg
And as an FYI... here is where the digital output is located on this player (I have already researched if this digital out connection leads back to an empty toslink socket and I verified that it does not).
https://i.vgy.me/k4aU8k.jpg |
|
|
Jump to forum Jump to topic |
| odotb3 |
|
Posted: 27 May 2020, 08:40
|
|
|
| If you can do it, I say go for it. Would be interesting to know if it will work. Even if it's just something to do. |
|
|
Jump to forum Jump to topic |
| nextwednesday |
|
Posted: 27 May 2020, 12:32
|
|
|
odotb3 wrote: If you can do it, I say go for it. Would be interesting to know if it will work. Even if it's just something to do.
Well said. The optical port ought to export the signal from CDs too, which is useful if recording on a MD or DAT machine, for instance.
Kudos if it works. |
|
|
Jump to forum Jump to topic |
| signofzeta |
|
Posted: 27 May 2020, 16:17
|
|
|
|
|
Jump to forum Jump to topic |
| kris |
|
Posted: 28 May 2020, 19:17
|
|
|
easy enough on a cld-d515. connect the trace after r895. put the cap behind the actual toslink once fitted. cutting the hole can be challenging.... I simply robbed a piece of back panel from a donor player....
Pioneer S315,D515 DTS mod (WORKING) |
|
|
Jump to forum Jump to topic |
| sonicboom |
|
Posted: 07 Jun 2020, 16:46
|
|
|
Lots of great tips and advice. Keep at it man I know you're super frustrated and likely close to giving up. You have nothing to loose at this point however and everything to gain.
You have some of the best techs here to help you (certainly not counting me in that group).
You...Can...Do...It! |
|
|
|
Page 1 of 1 [ Search found 7 matches ]
|
Thanks list