It is currently 22 Jul 2019, 21:48

All times are UTC [ DST ]

Search found 3 matches

Author Message

 Jump to forum   Jump to topic

Posted: 30 Aug 2017, 17:14 

it pretty much is. it's beneficial to give the player a good fresh relube. pop the top, expel the disc tray, and you'll have direct access to the laser sled transverse assy.

you can use WHITE LITHIUM GREASE and a light general purpose oil, though if you have affordable access to it, a Silicon-based grease is considered best.

the brass worm-drive shaft, and the guide shafts are the primary things to lubricate. GREASE for the WORM, OIL for the GUIDES;

this alone should correct most, if not all playback faults. it would be best to remove the disc tray entirely, to grease the gearwork underneath,
but that is not essential, and the timing gear for the tray drive shaft must be aligned properly with the tray's teeth track to be properly reassembled...

 Jump to forum   Jump to topic

Posted: 26 Jan 2018, 09:05 

So far the item I put in cart at 9:30am is still there more than 6 hours later.

Reason good enough for hope? :-)


 Jump to forum   Jump to topic

 Post subject: Re: CLD-97 PEB1013
Posted: 23 Jun 2018, 23:40 

Page 1 of 1 [ Search found 3 matches ]

All times are UTC [ DST ]

Jump to: