Hello so the other day i received a PAL laserdisc but i didn't have any working pal player for now so for fun i put the disc on an NTSC only player (CLD-R7G)
and instead of being ejected the player started to spin the disc and after like 20 second i got a garbled picture and it was playing after 10 second the player lose tracking and stop the RF signal was looking like that
and the picture on screen like that
i tried with another disc and with the other side of the first and no picture at all but then the signal is clean
both PAL disc where CLV
for the disc that was playing fine (without video/audio) i could decode the RF signal using LD-decode
the only issue i got is that the disc is outputting a P5 error iirc after like a minute of playback, and it stops, so it looks like it stop because it's not detecting "Valid signal"
do you have any idea how i could make the player ignore the error or what trick could be used to make it thinks the signal is correct ?
i have no service manual
and im also wondering why my player succeeded to catch a bit of video only on 1 side of a specific disc.