|
It is currently 26 Apr 2024, 20:17
|
View unsolved topics | View unanswered posts
|
|
|
|
audioboyz1973
|
Post subject: Re: Comb Filter Question Posted: 04 Nov 2018, 19:53 |
Advanced fan |
|
|
Joined: 16 Jun 2015, 15:40 Posts: 825 Location: Australia Has thanked: 105 times Been thanked: 95 times
|
phobicpanda wrote: In my most recent specific instance it is the R7G, but I've really only come to notice it on the Lion King Remastered CAV disc. I don't have that particular disc to compare, but do recall various scenes from "Mars Attacks" as great torture tests for comb filters! You're testing my memory now but iirc the R7G lets you adjust the 2D/3D threshold?
_________________ Looking for Hi-Vision Discs (MUSE or HDVS).......
|
|
|
|
|
phobicpanda
|
Post subject: Re: Comb Filter Question Posted: 04 Nov 2018, 21:55 |
Shows curiousity |
|
|
Joined: 14 Jan 2017, 01:05 Posts: 19 Location: United States Has thanked: 0 time Been thanked: 0 time
|
Quote: If you own the R7G you will need to play with the settings, I believe there are 3 memory settings for different discs or what you prefer.
You need to run the R7G through S-Video to get the best image using the filter, otherwise you won't be getting the use of the filter as the yellow video won't give you the filter.
Again you just need to play around with it and get the best setting for you. Ya, I've been using S-Video. Even with the 3D Y/C set to off the S-Video beats the s**t out of Composite for me.
|
|
|
|
|
audioboyz1973
|
Post subject: Re: Comb Filter Question Posted: 05 Nov 2018, 07:26 |
Advanced fan |
|
|
Joined: 16 Jun 2015, 15:40 Posts: 825 Location: Australia Has thanked: 105 times Been thanked: 95 times
|
phobicpanda wrote: The options are as follows: CNR, YNR, 3D Y/C, Sharpness I get best results on Lion King with everything set to off. CNR/YNR at even somewhat low settings cause some artifacts to streak off the characters. I'm somewhat unfamiliar with what each setting does, but I'm assuming CNR and YNR are Digital Noise Reduction, 3D Y/C is obviously the 3D Comb filter which should automatically trigger the 2D one if set to off?
I have also Batman Mr. Freeze Sub-Zero, but I don't have much issues with that one with the 3D Comb filter on. Yes the 3D Y/C is the one that adjusts 2D vs 3D for the filter. This is a pretty good filter though not perfect (but then none is), you will find a bit of checkerboarding with certain material, and so then you could turn this down if you're sensitive to it. (Though I recall this could be a trade off with more dot-crawl at lower settings.) Don't recall 100% the settings I used for the R7G but think the Y/C was generally on standard and then I tend to keep the YNR/luminance NR on the lower side with a bit more chroma NR. As suggested play around and find some settings that work for you. There is a memory but it only saves the settings as long as the player is plugged into the mains so you might want to write them down too! Just found this old post: https://forum.lddb.com/viewtopic.php?t=5552&p=68674Knew I'd waffled on about it somewhere here in the past! (Scroll down to my post on 12 Sept @ 16:29; and the next one just below that.)
_________________ Looking for Hi-Vision Discs (MUSE or HDVS).......
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|