| LaserDisc Database https://forum.lddb.com/ |
|
| S*** I so wish I had could buy this LD-S2 https://forum.lddb.com/viewtopic.php?f=23&t=8255 |
Page 2 of 2 |
| Author: | rein-o [ 20 Feb 2019, 14:53 ] |
| Post subject: | Re: S*** I so wish I had could buy this LD-S2 |
There are many ways to do this and it all depends on what you have and your experience with them. 1 get stain that is the correct color, touch it up wait many days for it to dry and then fill with epoxy and blue tape to hold it in place. after its dry you can sand lightly to smooth and then touch up with clear coat. 2 you can get powered pigment and mix into the epoxy and do the same with blue tape to keep it in place sand etc. 3 you can get artist oil paint to match the color and do the first step just swap oil paint with stain. Good luck, its very easy if you've done it before and if you have the materials. |
|
| Page 2 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|