| LaserDisc Database https://forum.lddb.com/ |
|
| [DDP-1] Optical output mod https://forum.lddb.com/viewtopic.php?f=24&t=12071 |
Page 1 of 1 |
| Author: | admin [ 27 Nov 2025, 03:50 ] |
| Post subject: | [DDP-1] Optical output mod |
| Author: | ldfan [ 02 Dec 2025, 18:59 ] |
| Post subject: | Re: [DDP-1] Optical output mod |
This mod does work but unfortunately it only works w/ the AC3-RF input only (coax & optical digital inputs are non-functional through the new output). I would recommend pin 9 of IC5 to access the digital output as this is where the input switching works and thus will be able to use the processor as a full blown switcher to pass all your LD digital sources through it (DTS, PCM, and AC3). Also, you can access that pin from the top so there is no need to remove the board. |
|
| Author: | ldstl [ 15 Feb 2026, 07:29 ] |
| Post subject: | Re: [DDP-1] Optical output mod |
That's mine. I need to post an update video showing the updated method you're talking about so it can output all incoming signals to the optical. The next DDP-1 I get, I'll post an update. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|