This slipped my mind the last few months...
E-mail sent just today
Posting answer here from MSB when I receive it. Fingers crossed
| LaserDisc Database https://forum.lddb.com/ |
|
| [LDD-1] Question on keeping it plugged https://forum.lddb.com/viewtopic.php?f=24&t=2788 |
Page 2 of 2 |
| Author: | kris [ 16 Nov 2014, 14:01 ] |
| Post subject: | Re: Lexicon LDD-1 question |
This slipped my mind the last few months... E-mail sent just today Posting answer here from MSB when I receive it. Fingers crossed
|
|
| Author: | substance [ 16 Nov 2014, 16:31 ] |
| Post subject: | Re: Lexicon LDD-1 question |
If you can't get answers I will open it up and reverse engineer it. It should be possible to switch inputs via control port too. |
|
| Author: | kris [ 17 Nov 2014, 19:27 ] |
| Post subject: | Re: Lexicon LDD-1 question |
got a reply today. That sure was fast It reads: Quote: Hi Kris, Thanks for writing. You may need to have a custom cable made for your particular setup. Here is the pin out for the DIN Plug Connector. You would simply need a mini mono plug at the other end, only using the +12 VDC and ground connections for Power On function. Please refer to the pin out configuration on your new amplifier, but usually the tip of the mini jack will be your +12 VDC. I hope this helps. Please let us know if you have any further questions and we will be glad to assist. Have a great day. KEVIN KENT Field Support Engineer Harman Luxury Audio Group, Lifestyle Division 8500 Balboa Blvd Northridge, CA 91329 Phone: (888) 691-4171 Email: csupport@harman.com Web: http://www.harman.com I am unable to post the drawing of the pinout for some reason, I'm not that patient with computers i'm afraid but it comes down to this... Code: Select all Pin1 ground |
|
| Author: | admin [ 28 Apr 2021, 12:21 ] |
| Post subject: | Re: Lexicon LDD-1 question |
graz138 wrote: I keep mine unplugged. While it is unplugged it will pass through a PCM signal. I confirm this is working exactly as mentioned in the manual. Quote: NOTE: When power is off, the LDD-1 automatically outputs the COAXial digital input. Attachment: LDD pass-through.jpg [ 53.54 KiB | Viewed 1420 times ] The Pioneer RFD-1 or Kenwood DEM9991D have pass-through capability but they need to be powered on to deliver. Julien |
|
| Page 2 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|