teddanson wrote:
Switch the button on the side of the device from SPDIF to Audio Interface.
No, it was already on Audio Interface...
Shows up as
Line (2- ZOOM U-44 Audio) but when selected as input, Reaper often freezes and crashes.
Defaults to 48kHz 24bit 2ch WaveOut. No signal when recording.
If I plug phones on the PHONES jack, I can hear the standard Digital Audio received on the Coax.
If I enable the AC3RF demodulator, of course I hear digital bitstream (garbage).
If I use the ZOOM as the Windows Output Audio, I can hear music on my phones plugged on the U44.
That's working fine.
It's Windows not recording over USB whatever is received on the Coax...
Reinstalled the Drivers, now it shows as
Line (ZOOM U-44 Audio).
But it still crashes Reaper. Weird.
Oh... I see it's also a "Sound, video and games controllers" under
ZOOM U-44 Audio but I can't select this one. Only the "Audio inputs and outputs" which seems to be related to the Analog Input 1 & 2 -- explaining why I'm not getting any signal.
=> Confirmed, if I plug a microphone in Input 1, Reaper can see the data real-time on the PC.
I just don't know how to tell the U44 to send the SPDIF data to the PC...
Julien