LaserDisc Database
https://forum.lddb.com/

Replacement parts for old vintage audio light bulbs
https://forum.lddb.com/viewtopic.php?f=29&t=10244		 Page 1 of 1
Author:  admin [ 07 Feb 2022, 05:40 ]
Post subject:  Replacement parts for old vintage audio light bulbs
I have little hope but if any of you is in the vintage audio gears hobby, chances are that you already had to replace some light bulbs on VU Meters at some point.

I have 4 of these to light up again:

Attachment:
TEAC.jpg
TEAC.jpg [ 30.67 KiB | Viewed 2038 times ]


From what I can tell after some research, they are the fuse/snap type running at 8V/55mA.

No reply from TEAC/Tascam, Tokyo vintage repairs shops don't have any left, online sellers for LED replacement can't confirm if their models will fit.

Any idea?

Julien
Author:  ldfan [ 07 Feb 2022, 06:22 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
Looks like you’re looking for axial lightbulbs and obviously would want original incandescent with a warm glow to match what you have now.

This site sells them….

https://www.jkllamps.com/home/axial-lea ... amp-audio/

…. but may not ship to Japan.

Also, seems they do sell them on eBay as well.
Author:  admin [ 07 Feb 2022, 07:29 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
ldfan wrote:
This site sells them….


Yes I already searched this website but the fuse extremities (Marantz type) are too big/wide for the TEAC/Tascam models.
And they sell by pack of 25 only.

They seem to be old TEAC part #5772925400.

Attachment:
bulbs.jpg
bulbs.jpg [ 23.75 KiB | Viewed 2032 times ]


Here is by 5pcs but they mention the fuse type is too big for Tascam as well.

https://www.dynamtechgroup.com/tape-meterlamps.php

I'm trying to avoid soldering things if I can...

Julien
Author:  rein-o [ 07 Feb 2022, 17:27 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
I think you also need a resistor but just replace them with LEDs and get the newer warm white color ones.
Author:  signofzeta [ 07 Feb 2022, 19:38 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
rein-o wrote:
I think you also need a resistor but just replace them with LEDs and get the newer warm white color ones.


Please don’t do this. LEDs look like trash in vintage gear.
Author:  rein-o [ 07 Feb 2022, 20:58 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
Sometimes these bulbs are solder only and you won't have any option unless you open up solder two wires with a holder of some type
so you can replace the bulbs.

Mine has been dead on one of the two channels on my amp ever since I bought it and I have been meaning to replace it but never have,
at this point I never will either.
Author:  admin [ 08 Feb 2022, 05:33 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
signofzeta wrote:
Please don’t do this. LEDs look like trash in vintage gear.


I might try both to decide which one looks better (but I do prefer vintage glow).



Julien
Author:  teddanson [ 03 May 2022, 22:39 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
I awoke in a cold sweat in the middle of the night yesterday and wondered if you ever got your bulbs?

At around 3am I woke again. There was a tap on my window. I turned it on and had a drink.

I couldn't get back to sleep. I noticed a bottle of sleeping pills on my bedside table. I woke one of them up and took it.

The lamp went out. I told it to be back by morning and went to sleep.
Author:  admin [ 04 May 2022, 04:19 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
teddanson wrote:
I awoke in a cold sweat in the middle of the night yesterday and wondered if you ever got your bulbs?


Thank you for the painstaking attention to my long vintage quests :-)

Because of the low unit price, I'm giving these guys a try (2x white 8V, 2x white 8~6.3V, 2x green 8V, 2x blue 8V).

https://audiolabga.com/mal_cart/mal_cart2020.php?nte=LAMP8V

Julien
Author:  teddanson [ 04 May 2022, 06:16 ]
Post subject:  Re: Replacement parts for old vintage audio light bulbs
Thank God for that. :thumbup:
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/