LaserDisc Database
https://forum.lddb.com/

[CLD-99] Re-Capping power board
https://forum.lddb.com/viewtopic.php?f=53&t=10756
Page 1 of 1

Author:  wildwall9 [ 30 Jan 2023, 00:14 ]
Post subject:  [CLD-99] Re-Capping power board

CLD99 Power Board
I contacted Digikey ,asked what info was needed to order..they said ,Volts ,Impedance,Size….I was told all the other values that come up in a search werent important…either Im missing something or just didnt understand their answer…If someone can give me advice on which one(s) will work, I’ll give you my first born….
25v 2200uf 12.5mm dia..heights arent important ,dia is…looking at the picks,Ive circled what is confusing me (easy to do)..
Ive also used 105C and General ,Audio as parameters…..tried to search using the original ELNA maker ..almost nothing..thought I could compare them..no love there…
It was suggested that I use a Data Sheet..Couldnt find anything in the cld99 service manual
TIA

Attachments:
6E2096C4-3AEA-4924-847F-106545298048.png
6E2096C4-3AEA-4924-847F-106545298048.png [ 184.92 KiB | Viewed 815 times ]
61E0A900-3170-4E5B-981F-F154874D4361.jpeg
61E0A900-3170-4E5B-981F-F154874D4361.jpeg [ 130.94 KiB | Viewed 815 times ]
A2DC5C7B-12D1-480D-BE91-12ED12E424A7.jpeg
A2DC5C7B-12D1-480D-BE91-12ED12E424A7.jpeg [ 165.03 KiB | Viewed 815 times ]

Author:  rein-o [ 30 Jan 2023, 00:58 ]
Post subject:  Re: Re-Capping power board

I'd have to google search what that CE85 degrees C means, about heat???
Otherwise get any of the ones you posted.
Where do I message my address, and will you supply the food :lol:

Voltage and Uf are the important things, since you found exact you are fine, I think you can get higher voltages as an example but Uf needs to be correct.
Uf Microfarads. Good luck.

You just need to make sure the cap can stand the heat since its larger and has that on the side, or did you ask them that? They should
answer you better than I can.

Author:  wildwall9 [ 30 Jan 2023, 01:40 ]
Post subject:  Re: Re-Capping power board

I went with the 105c (85c stock) temp as suggested here by?..cant remember …….its the other values that concern me..
15,24,29 mohms,impedance…I have 11 different Caps..these numbers are all over the place…as are the other the Ripple numbers…..Im assuming(oh no) that 105c will stand more heat than the 85c…
This is from Krbahr…found it mentioned elsewhere also…
Fir power supply rebuild I took out the caps and wrote down the values and then went over the Digi-key replacements and found 105 degree parts to replace them with. 105 degree parts will last longer, especially in hot spots.
My daughter said she’ll go if you get her the Pony I promised for Xmas…shes…32….they never grow up…as for food..shes bulimic…groceries are on you..

Author:  jd213 [ 30 Jan 2023, 16:08 ]
Post subject:  Re: Re-Capping power board

Yeah, 105c caps should last longer than 85c in general. Might be overkill for some cases but it's only a small price increase to get 105c.

Author:  rein-o [ 30 Jan 2023, 21:45 ]
Post subject:  Re: Re-Capping power board

Grocery's are out of the question, we have cheap eggs but still over 7 a dozen, so I guess I'll pass :lol:

Good luck with the rest of the player, hope those caps fix your issues.

Author:  wildwall9 [ 17 Mar 2023, 16:40 ]
Post subject:  Re: Re-Capping power board

rein-o wrote:
Grocery's are out of the question, we have cheap eggs but still over 7 a dozen, so I guess I'll pass :lol:

Good luck with the rest of the player, hope those caps fix your issues.

That they did..3 Caps replaced ands its all good..Thanks

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/