| LaserDisc Database https://forum.lddb.com/ |
|
| Where do I buy spareparts for Pioneer laserdisc players? https://forum.lddb.com/viewtopic.php?f=30&t=4688 |
Page 1 of 2 |
| Author: | Guest [ 23 Nov 2014, 14:49 ] |
| Post subject: | Where do I buy spareparts for Pioneer laserdisc players? |
who sells rubber belts and other spare parts for Pioneer CLD-R7G and Pioneer DVL-909 players? I would like to have a set of rubber belts just in case one of my players breaks in the future? can you provide with seller information, webshop links? these spare part belts are they genuine Pioneer parts or aftermarket high quality parts? is there a repair ciruit board scheme for DVL-909 AND CLD-R7G available to buy or download from internet? what else goes bad on both these players above? please let me know what to watch out for? i apprechiate your help thanks |
|
| Author: | nissling [ 23 Nov 2014, 14:55 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
Rubber belts for the 909 are available here. http://www.ebay.co.uk/itm/Pioneer-Rieme ... 5d506c42d8 Not sure which fits the R7G but it could be this one. http://www.ebay.co.uk/itm/Pioneer-Rieme ... 58afc41995 |
|
| Author: | Guest [ 23 Nov 2014, 15:22 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
nissling wrote: Rubber belts for the 909 are available here. http://www.ebay.co.uk/itm/Pioneer-Rieme ... 5d506c42d8 Not sure which fits the R7G but it could be this one. http://www.ebay.co.uk/itm/Pioneer-Rieme ... 58afc41995 thanks for both links bruschan do you know how many operating rubber belts there are inside for R7G and DVL-909? how many belts do you keep as spares for your players at home? do you keep other parts besides belts at home? thanks |
|
| Author: | nissling [ 23 Nov 2014, 15:27 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
There's only one in each that needs to be changed now and then. Not sure if I have any belts over at the moment. Think I repaired both a D505 and a D515 some time ago, but my R7G haven't had any issues with the belt so I haven't been in need of any spare ones. I've got some motor holders here as well, but will probably not need them for quite some time. These players are usually easy to fix. |
|
| Author: | Guest [ 23 Nov 2014, 15:49 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
nissling wrote: There's only one in each that needs to be changed now and then. Not sure if I have any belts over at the moment. Think I repaired both a D505 and a D515 some time ago, but my R7G haven't had any issues with the belt so I haven't been in need of any spare ones. I've got some motor holders here as well, but will probably not need them for quite some time. These players are usually easy to fix. is it the motorholder for R7G which goes bad or is ith the one for DVL-909 that goes bad? who sells motorholders for both players? |
|
| Author: | nissling [ 23 Nov 2014, 16:07 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
Neither of them usually goes bad, as they both have the improved M holder. Part is available here. http://www.donberg.ie/catalogue/audio_s ... c_199.html |
|
| Author: | Guest [ 23 Nov 2014, 16:40 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
nissling wrote: Neither of them usually goes bad, as they both have the improved M holder. Part is available here. http://www.donberg.ie/catalogue/audio_s ... c_199.html this motoholder does it fit both machines R7G and DVL-909? what about the clamp puck that holds the centre hole of the disc in position, does it go bad? |
|
| Author: | nissling [ 23 Nov 2014, 16:54 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
I know it works with the R7G and should work with the 909. I don't have any experience of the 909. The clamp can go bad for sure, but if you don't experience any issues with it you shouldn't worry. I've neved had to replace/fix it. |
|
| Author: | Guest [ 23 Nov 2014, 17:52 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
nissling wrote: I know it works with the R7G and should work with the 909. I don't have any experience of the 909. The clamp can go bad for sure, but if you don't experience any issues with it you shouldn't worry. I've neved had to replace/fix it. my players still looks new, like if they were removed from the box on purchase day. they have not been used very much. i guess clamps are still good |
|
| Author: | krbahr [ 24 Nov 2014, 04:34 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
The belt for those is a SCQ4.0. I do an internet search for PRB Beltline SCQ4.0 or the the acrual Pioneer part. Some off brand belts are actually not the full dimension of name brand belts. |
|
| Author: | kris [ 24 Nov 2014, 09:41 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
Parts are no problem here in belgium that is  I guess spare parts are available from Pioneer USA. I can't imagine otherwise since ld players we're much more common in the US than europe. I ordered soms motorholders and drivebelts here. They we're ordered with Pioneer Japan. I received everything I ordered without a glitch. I asked if they kept spare parts around in Belgium... No problem they said. we'll order them asap. Even the calibration disc was available. I got it in about 3 weeks time.
|
|
| Author: | Guest [ 24 Nov 2014, 12:04 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
kris wrote: Parts are no problem here in belgium that is I guess spare parts are available from Pioneer USA. I can't imagine otherwise since ld players we're much more common in the US than europe. I ordered soms motorholders and drivebelts here. They we're ordered with Pioneer Japan. I received everything I ordered without a glitch. I asked if they kept spare parts around in Belgium... No problem they said. we'll order them asap. Even the calibration disc was available. I got it in about 3 weeks time. brother where in belgium did you get these parts? is there a webshop available? maybe you can help me out getting these spare parts for me? i know about Donbergs shop, do you mean them? sweden is kinda retard when it comes to finding parts for laserdisc players! thanks |
|
| Author: | kris [ 24 Nov 2014, 12:38 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
I simply order them with Pioneer Belgium. I'm pretty sure you'll be able to order parts trough an official Pioneer dealer. Just give them the spare part number and they'll order them for you. I got myself a few known problem parts. Motorholders, belts, cam gears, prc hub on top of spindle motor etc... These parts are dead cheap. I have a brand new dvl-909-919e spindle motor come to think of it... I don't think I'll ever need it tough... 
|
|
| Author: | kris [ 24 Nov 2014, 12:46 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
some parts to consider: vnl1700 motor holder veb1184 rubber belt vnl1625 cam gear (pin may brake of one day) vnl1631 cam plate (another possible breakdown) the mentioned parts are applied in the dvl-909-919 and cld-d515 -cld-d925 and known clones like the denon la-2300-2700 or yamaha units. cheap parts that may come in handy one day! some partnumbers changed trough the years. Pioneer won't have a problem cross referencing these! |
|
| Author: | Guest [ 24 Nov 2014, 22:15 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
kris wrote: some parts to consider: vnl1700 motor holder veb1184 rubber belt vnl1625 cam gear (pin may brake of one day) vnl1631 cam plate (another possible breakdown) the mentioned parts are applied in the dvl-909-919 and cld-d515 -cld-d925 and known clones like the denon la-2300-2700 or yamaha units. cheap parts that may come in handy one day! some partnumbers changed trough the years. Pioneer won't have a problem cross referencing these! so these are the weak parts that may eventually break in the future? did you have # number for prc-hub ontop of the spindle, is this the clamp that holds and centers the disc in place? thanks |
|
| Author: | nissling [ 24 Nov 2014, 22:31 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
The motor holder is sometimes reffered to as VNL1779, but VNL1700 seem correct as well. |
|
| Author: | avengerch [ 25 Nov 2015, 14:47 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
It looks to me like this is the correct thread to ask: Where can I get a rubber belt for my Pioneer CLD-2850? The one in use still works, but it's a bit worn. So getting a replacement in time wouldn't be a bad idea. |
|
| Author: | nissling [ 25 Nov 2015, 15:01 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
Here you got one. http://www.ebay.de/itm/Riemen-fur-Pione ... Sw~OdVd-j3 |
|
| Author: | avengerch [ 25 Nov 2015, 15:13 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
This item must have been added shortly, it wasn't listed the last time I checked on ebay. Thank you! |
|
| Author: | refaust [ 15 Dec 2015, 16:57 ] |
| Post subject: | Re: Where do I buy spareparts for Pioneer laserdisc players? |
I've been trying to source the parts listed above today for my DVL-909 and spoke to Pioneer UK. If anyone in the UK wants them Pioneer told me that they do not stock them but they're available for 'For Your Home' tel 08445572510 R E |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|