LaserDisc Database https://forum.lddb.com/ |
|
Pioneer VNL1779 black M-holder https://forum.lddb.com/viewtopic.php?f=30&t=7781 |
Page 2 of 2 |
Author: | mipi [ 14 May 2018, 05:16 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
No you can't replicate. It's plastic, very small and full of all kind of angles, flat parts and raises. I doubdt if a CNC machine controller can replicate it exactly (and at a very high cost) |
Author: | takeshi666 [ 15 May 2018, 04:08 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
mipi wrote: No you can't replicate. It's plastic, very small and full of all kind of angles, flat parts and raises. I doubdt if a CNC machine controller can replicate it exactly (and at a very high cost) I was thinking more in terms of molding and casting rather than CNC. |
Author: | happycube [ 26 May 2018, 21:22 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
BTW at least some late production long-run CLD players still used the VNL1700 - I got a V2800 listed with a ton of front panel and some frame damage dated Sep. 2001 which had a VNL1700... ... and still, somehow, at least somewhat works. As a side note - the CLD-D504, S104, and presumably early runs of the CLD-59 have an even earlier m-holder, which explains why there are seem to be so many more problems with those... |
Author: | admin [ 08 Jun 2018, 05:45 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
krbahr wrote: The gray M-Holder had a different part number. The VNL-1779 is the improved black one. Pioneer Singapore confirmed that the black VNL1779 version is completely sold out, only the gray VNL1700 is left in stock. + They flag the VNL1700 as "FINAL STOCK / PART SUPPLY END PERIOD" Julien |
Author: | mipi [ 08 Jun 2018, 05:57 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
Check this: mipi @ DONBERG no longer has the VNL1779 |
Author: | admin [ 08 Jun 2018, 09:15 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
If we can believe the Pioneer parts catalog, the evolution of the M-Holder was: VNL1637 => VNL1700 => VNL1779 All compatible with each other? Julien |
Author: | mipi [ 08 Jun 2018, 09:28 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
The 1700 with the newer 1779 yes, the same, only different color and I guess strength. I have replaced 1700 with a 1779. For the older I don't know. |
Author: | oppelix [ 12 Aug 2021, 12:09 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
Hello LD fans, the subject VNL1779 is discussed in three forums on LDDb. Please have a look on Let's resurrect the VNL1779 / VNL1700 to see my posting concerning this matter: https://forum.lddb.com/viewtopic.php?f=30&t=8310&start=63 Thank you. |
Author: | fireproof710 [ 12 Feb 2022, 18:28 ] |
Post subject: | Re: Pioneer VNL1779 black M-holder |
I'm making new replacements. Have a look on ebay. Search VNL1779 |
Author: | oppelix [ 19 Dec 2023, 16:06 ] | ||
Post subject: | Re: Pioneer VNL1779 black M-holder | ||
In the stock of an unknown company I found a remaining quantity of the original packed VNL1779. If you are interested, please send me a PM or check eBay.de If all parts are sold, I will let you know here. Additional information: My 3D-made motor-holders are sold out. See: https://forum.lddb.com/viewtopic.php?f=30&t=8310&start=63
|
Page 2 of 2 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |