|
It is currently 19 Apr 2024, 12:35
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
ffrolvaag
|
Post subject: CLD-97 Drive Gear? Posted: 13 Jul 2019, 16:20 |
Genuinely interested |
|
|
Joined: 14 Sep 2014, 02:31 Posts: 35 Location: United States Has thanked: 4 times Been thanked: 8 times
|
My CLD-97 now fails to engage the laser when loading a disc. Basically I can hear the laser assembly motor whirring after disc loading. Taking the cover off, I can see that the gear that the laser assembly uses to ride across the main track broke off and I can only find half the cog. The other half is probably stuck to somewhere inside. Does anyone know where I can get a replacement cog? If I have that the fix should be within my capabilities, and wouldn’t require a full laser assembly replacement.
Did Pioneer use a standard track and gear assembly such that I could take a gear from a different player?
Sorry if my description doesn’t make sense. I took a couple of photos, but can’t post them at the moment. Any help appreciated. I do have other players, but would hate to lose this one for losing a simple cog.
If all else fails, I will try to have one 3D printed.
_________________ CLD-97, EAD TheaterVision, crystalio II VPS3800, JVC HD1, Marantz 7702 mk I, Sony DA80ES
|
|
|
|
|
ffrolvaag
|
Post subject: Re: CLD-97 Drive Gear? Posted: 16 Jul 2019, 01:27 |
Genuinely interested |
|
|
Joined: 14 Sep 2014, 02:31 Posts: 35 Location: United States Has thanked: 4 times Been thanked: 8 times
|
krbahr wrote: Buy a non-working CLD-2080 and hopefully that gear is good on that one and swap it onto your laser. Thanks, I am working on acquiring one. If I can’t source one, I was able to determine it is a 14mm, 16 tooth, 38 pitch gear. It looks like it is possible to have one custom made, but would probably be relatively expensive for a single one.
_________________ CLD-97, EAD TheaterVision, crystalio II VPS3800, JVC HD1, Marantz 7702 mk I, Sony DA80ES
|
|
|
|
|
invenio
|
Post subject: Re: CLD-97 Drive Gear? Posted: 30 Jul 2019, 21:00 |
Advanced fan |
|
|
Joined: 21 Sep 2011, 15:15 Posts: 743 Location: NH, United States Has thanked: 5 times Been thanked: 27 times
|
ffrolvaag wrote: krbahr wrote: Buy a non-working CLD-2080 and hopefully that gear is good on that one and swap it onto your laser. Thanks, I am working on acquiring one. If I can’t source one, I was able to determine it is a 14mm, 16 tooth, 38 pitch gear. It looks like it is possible to have one custom made, but would probably be relatively expensive for a single one. Maybe you can look into somebody 3D printing it. That should not be too expensive.
_________________ My Home Theater Gallery Laserdisc Collection Storage
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|