It is currently 24 Apr 2024, 00:26




 Page 1 of 1 [ 1 post ] 
Author Message
 Post subject: Novus 1 2 3 Plastic Polishing of Laserdiscs
PostPosted: 22 Jul 2020, 01:36 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8106
Location: Dullaware
Has thanked: 1219 times
Been thanked: 844 times
Well I really wanted to make a video of this how to but decided to just post pics.

Here are stages of a scratch on an LD, this will work most of the time but for this disc it didn't, the scratch was actually a partial
manufacturing defect and you can slightly see in the light in person that there is a wave in the plastic.

First you start with Novus 3, this is for heavy scratches. As you can see in this picture the scratch before and the Novus 3
Attachment:
20200720_165808-1.jpg
20200720_165808-1.jpg [ 107.95 KiB | Viewed 1168 times ]

You must put a thin layer of the paste on and let it air dry, this I have found to give the best results.
Attachment:
20200720_165840-1.jpg
20200720_165840-1.jpg [ 104.35 KiB | Viewed 1168 times ]

Then buff until its removed, you may have a slight film or areas that didn't get removed, don't worry you may
need to do this a few times.
Attachment:
20200720_170019-1.jpg
20200720_170019-1.jpg [ 107.04 KiB | Viewed 1168 times ]

Then you will go to Novus 2, this one is a little different, I put it on wet and keep buffing until all polish is gone.
I may need to do this multiple times but its the same way. Put on wet and keep buffing, if you feel heat under your finger and cloth
you are polishing too hard or fast, once you feel hot to the touch you need more polish.
Attachment:
20200720_170344-1.jpg
20200720_170344-1.jpg [ 120.08 KiB | Viewed 1168 times ]

This final picture is the same area once finished. I didn't use Novus 1 for this but you can use this to clean your disc of finger prints etc.
Just don't get it on the label or it may smear on certain types.
Attachment:
20200720_170921-1.jpg
20200720_170921-1.jpg [ 99.85 KiB | Viewed 1168 times ]


If you feel that it didn't work or you still see the scratch you would depending on how bad the scratch is start with 3 again
and then 2, you may need to do this multiple times.

This WILL NOT remove very deep major scratches but this is what you need to do in order to fix bad looking disc
or even some discs that won't play.

I can tell you, collecting LDs since 1989 and buying a majority of used LDs I've only ever had to polish around 20 discs
and I've had over 1000 discs easily pass through my hands.
Most of the ones I had to clean were Discovision discs, while it never made a bad disc play it did sometimes help.

I am giving this info for free so take it for what it is, do it at your own risk.

If you have sticky edges or sticky on the play surface you are better off cleaning with denatured alcohol or lighter fluid.
Again don't get it on the label and put it on a clean soft cloth.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 1 post ] 


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: