LaserDisc Database https://forum.lddb.com/ |
|
Mod Marantz LV510U for Pioneer Remote https://forum.lddb.com/viewtopic.php?f=30&t=9678 |
Page 1 of 1 |
Author: | krbahr [ 04 Mar 2021, 20:03 ] |
Post subject: | Re: Mod Marantz LV510U for Pioneer Remote |
Just be careful as there are multiple button configurations stored in the IC and the voltage levels on the pins load the desired configuration. So it will operate as a Pioneer unit but the functions labeled on the front may perform a different function, but the remote will work as it should. |
Author: | cplusplus [ 05 Mar 2021, 00:57 ] |
Post subject: | Re: Mod Marantz LV510U for Pioneer Remote |
Thanks Kurtis. So far so good on the front panel buttons, I haven't done exhaustive testing but all seems fine. I pulled pin 31 low (OEMNO1 - OEM Select Port) and it did not work until I noticed J102, J103 and removed them. I haven't traced J102, J103 to see what they do. I tried this on a ProScan CLD-2080 a while back where I pulled the FLKY IC low, but I assume there is something else that needs to be jumped or cut. I still have it as a donor unit so I might try getting it back to OEM remote as well. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |