|Kenwood LVD-290 fuse/ARC suppressor advice
|Page 1 of 1|
|Author:||rubenerd [ 13 Jun 2021, 11:42 ]|
|Post subject:||Kenwood LVD-290 fuse/ARC suppressor advice|
Long time reader, first time poster, etc!
I've inherited my old man's Kenwood LVD-290 from Singapore. This is the only mention of it I've ever been able to find, it's definitely a bit of an odd ball. AC-3 and made for the European market, but it's NTSC.
It worked perfectly the first time I used it, but the second time it refuses to power on. The fuse on the power supply was blown, but I replaced twice more with identical ones and they blew again.
I've been doing a bunch of reading, and the most common suggestion I read is that it could be a shorted ARC suppressor. I only know enough to be dangerous, so I'm not sure if the power supply has one, or which component it'd be. Anyone have any ideas where I should start?
|Author:||cplusplus [ 16 Jun 2021, 19:19 ]|
|Post subject:||Re: Kenwood LVD-290 fuse/ARC suppressor advice|
I don't see any arc suppression in your photos. In the LD realm this is a late-model Pioneer issue.
Start with checking everything that begins with F for continuity and IC/ICP (or anything that looks like a two leg transistor- maybe IC221).
|Page 1 of 1||All times are UTC [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group