LaserDisc Database https://forum.lddb.com/ |
|
Kenwood LVD-290 fuse/ARC suppressor advice https://forum.lddb.com/viewtopic.php?f=30&t=9863 |
Page 1 of 1 |
Author: | rubenerd [ 13 Jun 2021, 11:42 ] |
Post subject: | Kenwood LVD-290 fuse/ARC suppressor advice |
Long time reader, first time poster, etc! I've inherited my old man's Kenwood LVD-290 from Singapore. This is the only mention of it I've ever been able to find, it's definitely a bit of an odd ball. AC-3 and made for the European market, but it's NTSC. It worked perfectly the first time I used it, but the second time it refuses to power on. The fuse on the power supply was blown, but I replaced twice more with identical ones and they blew again. I've been doing a bunch of reading, and the most common suggestion I read is that it could be a shorted ARC suppressor. I only know enough to be dangerous, so I'm not sure if the power supply has one, or which component it'd be. Anyone have any ideas where I should start? Attachment: Attachment:
|
Author: | cplusplus [ 16 Jun 2021, 19:19 ] |
Post subject: | Re: Kenwood LVD-290 fuse/ARC suppressor advice |
I don't see any arc suppression in your photos. In the LD realm this is a late-model Pioneer issue. Start with checking everything that begins with F for continuity and IC/ICP (or anything that looks like a two leg transistor- maybe IC221). |
Author: | paran01d [ 06 Oct 2022, 05:28 ] |
Post subject: | Re: Kenwood LVD-290 fuse/ARC suppressor advice |
I have a similar kenwood player with the same power supply that appears to be broken in a different way, dont suppose you ever go this fixed ? |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |