|
It is currently 23 Apr 2024, 22:06
|
View unsolved topics | View unanswered posts
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 24 May 2021, 10:58 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
signofzeta wrote: I’ve never seen them but they can be made or cut down from 12”s pretty easily. ok but cut a bit of you mean? Is there a way to close the open sides? For my 12" discs I use blake sleeves.
|
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 24 May 2021, 10:59 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
rein-o wrote: Inside or outside??
Inside you are SOL and need to make them yourself, get an electric hot knife and make them. Outside use magazine bags. I mean outside. What do you mean with SOL? Are magazine bags about the same width? And because they are higher you cut a bit of? Just wondering..
|
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 24 May 2021, 22:05 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
rein-o wrote: Are you looking for bag inside or outside for 8 inch disc??? like i said above, outside protection sleeve
|
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 25 May 2021, 11:09 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
rein-o wrote: Magazine bag, should buy at comic shop or order. You can see size on outside of bag to see exact size. ok, but they are too large. fit the sleeve and cut rest off?
|
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 25 May 2021, 11:13 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
lons_vex wrote: A long time ago I used to have these, perfect fit but not clear. Rather "milky" looking. yes. is it plastick? looks a bit like an envelope
|
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 25 May 2021, 12:34 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
signofzeta wrote: It looks like a home made rice paper wrapper. A very Japanese solution. Fantastically easy to make but not as easy as the hot knife on a magazine bag trick. why you have to use a hot knife? if the width is ok you only have to cut off a bit or not?
|
|
|
|
|
signofzeta
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 25 May 2021, 23:39 |
Jedi Knight |
|
|
Joined: 14 Jan 2010, 09:44 Posts: 5986 Location: Ann Arbor Has thanked: 1292 times Been thanked: 1105 times
|
tajvdz wrote: signofzeta wrote: It looks like a home made rice paper wrapper. A very Japanese solution. Fantastically easy to make but not as easy as the hot knife on a magazine bag trick. why you have to use a hot knife? if the width is ok you only have to cut off a bit or not? It welds the bag shut right there as it cuts.
_________________ All about LD care, inner sleeves, shrink wrap, etc.
https://youtu.be/b3O-vHpHRpM
|
|
|
|
|
tajvdz
|
Post subject: Re: protection sleeves for 8" laserdiscs? Posted: 26 May 2021, 11:08 |
Shows curiousity |
|
|
Joined: 22 Feb 2021, 21:56 Posts: 21 Location: Netherlands Has thanked: 0 time Been thanked: 1 time
|
signofzeta wrote: tajvdz wrote: signofzeta wrote: It looks like a home made rice paper wrapper. A very Japanese solution. Fantastically easy to make but not as easy as the hot knife on a magazine bag trick. why you have to use a hot knife? if the width is ok you only have to cut off a bit or not? It welds the bag shut right there as it cuts. sorry, what do you mean?
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|