Well, someone was recently able to partially capture and demodulate the RF envelope of a VHS cassette. So maybe as this develops further there will be enough interest for a mass produced Domesday Duplicator.
| LaserDisc Database https://forum.lddb.com/ |
|
| Domesday Duplicator boards. Who wants one? https://forum.lddb.com/viewtopic.php?f=32&t=8419 |
Page 2 of 2 |
| Author: | titan91 [ 15 Sep 2019, 01:23 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
I am interested in an assembled Domesday Duplicator board as well. |
|
| Author: | teddanson [ 16 Sep 2019, 12:54 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
Yep. No update from my side as unfortunately I still can't get a fabricator to get all of the required, or alternative parts. It is proving to be a real struggle to get this sorted. If we can find a decent fabricator that can get all of the components and for a fair bulk-buy price then this will be a go. Still stuck in limbo for now, sorry all. |
|
| Author: | titan91 [ 16 Sep 2019, 15:44 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
Well, someone was recently able to partially capture and demodulate the RF envelope of a VHS cassette. So maybe as this develops further there will be enough interest for a mass produced Domesday Duplicator.
|
|
| Author: | chris_malone [ 25 Sep 2019, 04:44 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
titan91 wrote: I am interested in an assembled Domesday Duplicator board as well. Me too! I'd love to get into this but would prefer to do so with assembled boards first as a working starting point! Cheers Chris |
|
| Author: | titan91 [ 31 Oct 2019, 14:54 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
Does anyone know of another potential source for these? I’d like to try a test capture with a VHS tape. Someone on the Freenode IRC channel said there’s a waiting list but he wasn’t sure who was putting it together. Edit: I decided to go with a CX23880 based capture card and cxadc instead. Can't beat 10 bucks! I've since seen some example decodes using this which looks as good as VHS is going to look. Heck, even LaserDisc captures look incredibly good at 28.6MSPS! |
|
| Author: | 9954tony [ 25 Nov 2019, 04:55 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
I'd also be interested in an assembled board, as long as the price remains reasonable. |
|
| Author: | rhoran [ 10 Jan 2020, 09:55 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
Any update on these? I am interested in one. |
|
| Author: | teddanson [ 10 Jan 2020, 23:47 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
No sorry. I canned the idea as getting the parts is a nightmare. I hope the guys behind the project put up a Kickstarter or similar for pre made boards. I would love to get one. If things change I will try again. I got close this time! Thanks all. |
|
| Author: | nbacon [ 08 Mar 2020, 03:05 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
Not to cast a bit of Necromancy on a thread, but I'm working on a run that is offering individual components and fully assembled DomesDay86 units. See my thread at nbacon @ Large run of fully assembled DomesDay86 Kits & Calibration Feel free to message me if you have any questions! |
|
| Author: | drecksoft [ 05 Aug 2020, 11:45 ] |
| Post subject: | Re: Domesday Duplicator boards. Who wants one? |
I also have a few boards left. See here: Domesday Duplicator boards available |
|
| Page 2 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|