| LaserDisc Database https://forum.lddb.com/ |
|
| Need help with iScan VP-50 Pro https://forum.lddb.com/viewtopic.php?f=50&t=10271 |
Page 1 of 1 |
| Author: | dennish [ 25 Feb 2022, 23:19 ] |
| Post subject: | Need help with iScan VP-50 Pro |
I have an iScan VP-50 Pro I have been trying to get up and running for a few hours now but no joy. Problem is getting a signal to pass through my AVR to the projector. My test equipment, Sansung VCR/DVR HDMI Out ---> iScan VP-50 Pro HDMI 1 In --> iScan VP-50 Pro HDMI Out --> Denon AVR-X6500H HDMI 2 In --> Denon AVR-X6500H HDMI Out --> Sony VPL-VW285ES Projector HDMI 1 In. I reset the VP-50 Pro to factory settings and verified the Input is HDMI 1 and Output is HDMI. I have a Blue light that means it sees an incoming signal. I was able to hook the VP-50 to a small tabletop flatscreen TV and selected 720P for format on the VP-50 and got the VP-50 on-screen menu. Took it back to the HT room hooked everything back up but still no signal to the projector. My nest step tomorrow is to find a cheap DVD player in a thrift store and go back to the tabletop flatscreen TV + DVD player + VP-50 and see if I can get a DVD to play. Anything I'm doing wrong in the setup? All my other equipment new and old works with my AVR. Dennis |
|
| Author: | dennish [ 26 Feb 2022, 13:35 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
Update I hooked the VP-50 Pro directly to my Sony projector via the HDMI 2 port and have the VP-50 on screen menu. So next issue to figure out is why the Denon AVR will not pass the VP-50 Pro signal through the AVR to the projector. |
|
| Author: | dennish [ 26 Feb 2022, 17:50 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
Well, this for sure is an issue of the Denon AVR-X6500H not liking the VP-50 Pro for some reason. I pulled an old NAD T751 AVR out of storage, ran to Walmart and bought a cheap $24 DVD player and hook all that and the VP-50 Pro up directly to the Sony projector and everything works as it should. |
|
| Author: | admin [ 27 Feb 2022, 05:54 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
(throwing naive ideas) Maybe some DHCP issue? Using HDMI Zone 2? The VP-50 is up-scaling to analog or converting to digital? https://manuals.denon.com/AVRX6500H/NA/EN/DRDZSYkepqwwqe.php Julien |
|
| Author: | jd213 [ 27 Feb 2022, 12:07 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
The VP50 Pro is also known for bad solder joints: http://www.curtpalme.com/forum/viewtopic.php?p=409041 Mine has also been on the fritz for a while, need to open it up and poke around with a multimeter and look for broken/cold solder. Don't really care about it much anymore since my Sony BD recorder does a better job of deinterlacing, particularly with anime. |
|
| Author: | dennish [ 27 Feb 2022, 13:17 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
The VP-50 seems to be working as it should because I can hook it up directly to the projector and get a picture, going to do the same with my 50" flat screen today. As for the AVR-X6500H I have tried turning off and on every HDMI and video setting but no joy. Weird for sure |
|
| Author: | dennish [ 28 Feb 2022, 12:33 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
Update VP-50 Pro is passing through my Denon AVR-X6500H now, the fix was using the HDMI CD7 Input that is a pass through. For whatever reason the Denon didn't like the VP-50 Pro when connected to HDMI Input 1 thru 6. |
|
| Author: | dennish [ 21 Mar 2022, 14:03 ] |
| Post subject: | Re: Need help with iScan VP-50 Pro |
Another Update and another question. Turns out the passing through my Denon AVR-X6500H issue was operator error, I didn't have the VP-50 output set to HDMI. Now that I have the VP-50 up and running with my Pioneer CLD-R7G the next issue or question is the picture size on my 120" screen. If I play the Pioneer CLD-R7G without the VP-50 the picture (letterbox / widescreen) fills my screen on the right and left side. If I play the Pioneer CLD-R7G with the VP-50 the picture size is reduced and I have borders on the right and left side. I have tried all the VP-50 settings but none seem to allow the picture to fill the screen on the right and left side. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|