|
It is currently 13 May 2024, 10:00
|
View unsolved topics | View unanswered posts
|
|
|
|
mikeymtl
|
Post subject: Re: DVDO iscan VP50 optimal settings Posted: 14 Dec 2018, 23:38 |
Third post and above |
|
|
Joined: 14 Dec 2018, 16:48 Posts: 6 Location: Canada Has thanked: 5 times Been thanked: 2 times
|
mimylovesjapan wrote: just some things but : Deinterlacing : film mode for 90% of movies. Color Space : 4.2.2 Auto aspect ratio : off 1:1 frame rate : on frame rate : lock (60hz) Thanks, will start here and see how it looks! Much appreciated
|
|
|
|
|
nissling
|
Post subject: Re: DVDO iscan VP50 optimal settings Posted: 15 Dec 2018, 10:26 |
Absolute fan |
|
|
Joined: 24 Jun 2010, 10:23 Posts: 1645 Location: Sweden Has thanked: 11 times Been thanked: 80 times
|
substance wrote: There really isn’t any setting on vp50 related to laserdisc picture quality. You can adjust contrast, brightness and color but you shouldn’t use someone else’s settings as these are display specific. True, and if you adjust chroma/hue on a modern display you'll break the gamut. Pretty much what color matrix you see is what you get, unless you're given clear alternatives (like on the Panasonic sets where you can choose between BT.601, BT.709 etc).
|
|
|
|
|
forper
|
Post subject: Re: DVDO iscan VP50 optimal settings Posted: 16 Dec 2018, 07:56 |
Absolute fan |
|
|
Joined: 01 May 2016, 06:38 Posts: 2040 Location: Australia Has thanked: 334 times Been thanked: 222 times
|
mimylovesjapan wrote: just some things but : Deinterlacing : film mode for 90% of movies. Color Space : 4.2.2 Auto aspect ratio : off 1:1 frame rate : on frame rate : lock (60hz) This is great Mimi, you know your stuff of course. Would these recommended settings change for using a CRT like my Sony KVHRM36 with super fine pitch comb filter?
_________________ SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
|
|
|
|
|
forper
|
Post subject: Re: DVDO iscan VP50 optimal settings Posted: 16 Dec 2018, 09:30 |
Absolute fan |
|
|
Joined: 01 May 2016, 06:38 Posts: 2040 Location: Australia Has thanked: 334 times Been thanked: 222 times
|
mimylovesjapan wrote: In fact, I don't know so much ^^ I also don't know anything about CRT... I just know, that most of digital screen will have v-sync problem if you don't lock framerate. But maybe CRT don't need that. Auto aspect ratio is a pain in the *ss when you use old format like VHS or LD. The original color space of LD should be 4.2.2, then the best should be to pass through, if the screen accept it. (I am not really sure about though... need someone to confirm it) Thanks for the reply Mimi, I'll try out your earlier recommended settings and see if I get an improvement. Right now I just use factory defaults basically and adjust each movie to OAR using over and underscan. I had previously thought that VP-50 wasn't much capable of actually improving LD's picture and I saw it as a nice switcher and scaler that at least wouldn't degrade the picture any. I'm very happy with the picture I get right now but very interested that I might be able to improve it. I don't really understand what deinterlacing means but I know I can play with the aspect ratio until it's perfect and that's "scaling" right?
_________________ SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
|
|
|
|
|
forper
|
Post subject: Re: DVDO iscan VP50 optimal settings Posted: 16 Dec 2018, 10:46 |
Absolute fan |
|
|
Joined: 01 May 2016, 06:38 Posts: 2040 Location: Australia Has thanked: 334 times Been thanked: 222 times
|
Okay I'm playing back Return of the Jedi CAV definitive right now and it looks great to me. I switched to film mode and there may be an improvement here, not sure yet. However some options like color space and auto aspect ratio are't available for me、 I guess because I'm I'm not outputting HDMI, but RGBHV. Well LD looks as great as ever on my setup and I'm settling in for some classic Star Wars action tonight..thanks again. .
_________________ SONY MDP-355GX, DVDO iscan VP50, SONY KVHR-M36
|
|
|
|
|
powerofld
|
Post subject: Re: DVDO iscan VP50 optimal settings Posted: 19 Dec 2018, 12:09 |
Honest fan |
|
|
Joined: 14 Oct 2018, 19:58 Posts: 90 Location: Japan Has thanked: 18 times Been thanked: 18 times
|
mimylovesjapan wrote: hello powerofld ! I think that the screen will shake in still mode with any video processor, except IDK video processors. I don't know why. Even lumagen can't stop the screen shaking in still mode. IDK is a really really strange creature... mimylovesjapan Thank you mimylovesjapan Thank you I was relieved to believe that it was not a malfunction To prevent shaking I It is improved by using IDK VSC - 02 or by putting FOR.A FA - 395 in between FA-395 Has the function of TBC I think that it is the influence of TBC ------------------------------ Player Pioneer LD-1000(1981) Pioneer LD-S1(1986) Pioneer HLD-X0(1995) TBC FOR.A FA-395 (Time base collector/ Frame Synchronizer) Scaler IDK VSC-02A DVDO iSCAN DUO Display Panasonic TH-32LX75S(LCD) Player ↓ FOR.A FA-395 TBC ON ACC ON (Auto Contrast) Composite output (S / N is improved to 56 db) ↓ Scaler IDK VSC-02A VBS→1080p ↓ Display Player ↓ Scaler DVDO iScan DUO VBS→1080p60 ↓ Display
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|