S-video, it just ignores scaling. I can have just basic 4:3 or stretched up 16:9.
Via Retrotink everything works just fine, can simply go preset '4:3 letterboxed' and it scales up nicely.
| LaserDisc Database https://forum.lddb.com/ |
|
| DVDO Iscan Help https://forum.lddb.com/viewtopic.php?f=50&t=9924 |
Page 1 of 1 |
| Author: | jakeheke [ 25 Jul 2021, 02:12 ] |
| Post subject: | DVDO Iscan Help |
Need help with my Iscan Duo. Playing a 4:3 letterboxed disc, If i input S-video out in from my R7G it assumes it is widescreen it seems. I can manually select input is 4:3 but then its locks it as a 4:3 image but unable to zoom/scale up to my Widescreen. But if i go via my Retrotink to the IScan everything is fine and i can just go preset scale to 4:3 letterboxed and it scales up correctly and nicely. |
|
| Author: | jakeheke [ 25 Jul 2021, 02:36 ] |
| Post subject: | Re: DVDO Iscan Help |
S-video, it just ignores scaling. I can have just basic 4:3 or stretched up 16:9. Via Retrotink everything works just fine, can simply go preset '4:3 letterboxed' and it scales up nicely. |
|
| Author: | jakeheke [ 25 Jul 2021, 03:16 ] |
| Post subject: | Re: DVDO Iscan Help |
So played some more like a crazy person putting markers on and around screen  and it seems via s-video it just forces to to scale from 4:3 letterbox automatically correctly .Were as from retrotink i have to tell it to do so. Unless this looks stretched to anyone i think im good  ignore the cheap phone taking photo of a TVNow to fiddle with R7G settings and IScan settings... 
|
|
| Author: | laserfanhld-gb [ 26 Jul 2021, 14:17 ] |
| Post subject: | Re: DVDO Iscan Help |
Hi Jake; its a while since I had my DVDO VP50 so memory is a tad rusty, but I notice from the pics you had PReP mode engaged when inputting via Retrotink but off when direct from LD player - did you try toggling this setting on both inputs? Teddanson may hopefully be able to better assist here when he sees the thread
|
|
| Author: | teddanson [ 26 Jul 2021, 16:26 ] |
| Post subject: | Re: DVDO Iscan Help |
Hmm that's odd I don't recall the VP50 Pro locking in AR in this way. I don't have it hooked up at the minute as I'm waiting on a cable to help me upgrade the firmware (see if I can fix that audio bug). When I get the VP50 Pro up and running again I'll try and replicate the issue and see if I can help. I'm not too good at this stuff though so someone else here may be far more knowledgeable. |
|
| Author: | jakeheke [ 27 Jul 2021, 03:19 ] |
| Post subject: | Re: DVDO Iscan Help |
Believe im sorted now as in my last post here. Laserfanhld i believe the PreP technology can only be used for P/Progressive signals. But will double check |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|