LaserDisc Database https://forum.lddb.com/
[LD-V200] Spindle motor hall effect sensors DXX1180 https://forum.lddb.com/viewtopic.php?f=52&t=11285	Page 1 of 1

---

Author:	unclelaser [ 31 Mar 2024, 04:35 ]
Post subject:	[LD-V200] Spindle motor hall effect sensors DXX1180
By chance does anyone know what kind of hall effect sensors are used on the DXX1180 spindle motor in the Pioneer LD-V200 from 1989, the sensor package is just marked with what looks like ". D" there is 3 of them and they are in a 4pin dip configuration . If you might know where I can find this spindle motor that would be helpful too. Thanks!

---

Author:	unclelaser [ 31 Mar 2024, 07:41 ]
Post subject:	Re: Pioneer LD-V200 Spindle motor hall effect sensors DXX118
The spindle motor also has on the pcb the hall sensors are mounted to this part# : JAPAN SERVO TDK-T41V PC-859E , BLDC IS CONNECTED TO A TA8413P TOSHIBA 3 PHASE BI-POLAR HALL MOTOR IC. PIONEER CALLS THE SPINDLE MOTOR IN THE SERVICE MANUAL: DXX1180 MOTOR ASSEMBLY. THE LASERDISC PLAYER MODEL GOES BY Three MODEL NUMBERS : PIONEER LD-V200 AND THE WAS REBRANDED BY DKK KARAOKE AS DKK-P100 and the LD-V17 in Japan. i BELIEVE THIS MODEL TO BE SOMEWHAT RARE AND WOULD LIKE TO GET IT FIXED ANY HELP ON SOURCES FOR PARTS OR MORE INFO WOULD BE OF GREAT HELP . THANKS AGAIN!!! ***Here is a link to the service manual: https://manuals.lddb.com/LD_Players/Pio ... l_Scan.pdf Attachments: Screenshot 2024-05-13 004748.png [ 162.21 KiB | Viewed 662 times ] Screenshot 2024-05-13 004944.png [ 76.22 KiB | Viewed 662 times ] Screenshot 2024-05-13 005054.png [ 157.46 KiB | Viewed 662 times ] Screenshot 2024-05-13 005519.png [ 196.57 KiB | Viewed 662 times ] Screenshot 2024-05-13 025728.png [ 267.59 KiB | Viewed 651 times ]

---

Author:	unclelaser [ 13 May 2024, 06:52 ]
Post subject:	Re: [LD-V200] Spindle motor hall effect sensors DXX1180
If anyone else has ran into this problem, here is what I think the part is now. I think its an: AKM HW-300A Hall Sensor. Here is the DATASHEET: https://mm.digikey.com/Volume0/opasdata ... W-300A.pdf Here is where you can buy it: https://www.aliexpress.us/item/32568021 ... ry_from%3A I also found a place to buy the spindle in Hungry, talked to the guy through email but it sounded like the logistics of payment and shipping might be hard to arrange I was also having to translate everything into Hungarian. But here is the place I found the spindle motor: https://www.kovacselektronika.hu/produc ... or-dxx1180 Just ordered some and will update post once I give them a try. If you have anything to add please do. Thanks -Uncle-Laser Attachments: Screenshot 2024-05-13 011812.png [ 9.52 KiB | Viewed 657 times ]

---

Page 1 of 1	All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/