It is currently 09 Oct 2024, 17:31




 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: [LD-V200] Spindle motor hall effect sensors DXX1180
PostPosted: 31 Mar 2024, 04:35 
Third post and above
Third post and above
User avatar

Joined: 31 Mar 2024, 04:22
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 2 times
By chance does anyone know what kind of hall effect sensors are used on the DXX1180 spindle motor in the Pioneer LD-V200 from 1989, the sensor package is just marked with what looks like ". D" there is 3 of them and they are in a 4pin dip configuration . If you might know where I can find this spindle motor that would be helpful too. Thanks!
Offline
 Profile  
 
 Post subject: Re: Pioneer LD-V200 Spindle motor hall effect sensors DXX118
PostPosted: 31 Mar 2024, 07:41 
Third post and above
Third post and above
User avatar

Joined: 31 Mar 2024, 04:22
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 2 times
The spindle motor also has on the pcb the hall sensors are mounted to this part# : JAPAN SERVO TDK-T41V PC-859E , BLDC IS CONNECTED TO A TA8413P TOSHIBA 3 PHASE BI-POLAR HALL MOTOR IC. PIONEER CALLS THE SPINDLE MOTOR IN THE SERVICE MANUAL: DXX1180 MOTOR ASSEMBLY. THE LASERDISC PLAYER MODEL GOES BY Three MODEL NUMBERS : PIONEER LD-V200 AND THE WAS REBRANDED BY DKK KARAOKE AS DKK-P100 and the LD-V17 in Japan. i BELIEVE THIS MODEL TO BE SOMEWHAT RARE AND WOULD LIKE TO GET IT FIXED ANY HELP ON SOURCES FOR PARTS OR MORE INFO WOULD BE OF GREAT HELP . THANKS AGAIN!!! ***Here is a link to the service manual: https://manuals.lddb.com/LD_Players/Pio ... l_Scan.pdf


Attachments:
Screenshot 2024-05-13 004748.png
Screenshot 2024-05-13 004748.png [ 162.21 KiB | Viewed 480 times ]
Screenshot 2024-05-13 004944.png
Screenshot 2024-05-13 004944.png [ 76.22 KiB | Viewed 480 times ]
Screenshot 2024-05-13 005054.png
Screenshot 2024-05-13 005054.png [ 157.46 KiB | Viewed 480 times ]
Screenshot 2024-05-13 005519.png
Screenshot 2024-05-13 005519.png [ 196.57 KiB | Viewed 480 times ]
Screenshot 2024-05-13 025728.png
Screenshot 2024-05-13 025728.png [ 267.59 KiB | Viewed 469 times ]


Last edited by unclelaser on 13 May 2024, 11:04, edited 5 times in total.
Offline
 Profile  
 
 Post subject: Re: [LD-V200] Spindle motor hall effect sensors DXX1180
PostPosted: 13 May 2024, 06:52 
Third post and above
Third post and above
User avatar

Joined: 31 Mar 2024, 04:22
Posts: 7
Location: United States
Has thanked: 0 time
Been thanked: 2 times
If anyone else has ran into this problem, here is what I think the part is now. I think its an: AKM HW-300A Hall Sensor.

Here is the DATASHEET: https://mm.digikey.com/Volume0/opasdata ... W-300A.pdf
Here is where you can buy it: https://www.aliexpress.us/item/32568021 ... ry_from%3A

I also found a place to buy the spindle in Hungry, talked to the guy through email but it sounded like the logistics of payment and shipping might be hard to arrange I was also having to translate everything into Hungarian. But here is the place I found the spindle motor: https://www.kovacselektronika.hu/produc ... or-dxx1180

Just ordered some and will update post once I give them a try. If you have anything to add please do. Thanks -Uncle-Laser


Attachments:
Screenshot 2024-05-13 011812.png
Screenshot 2024-05-13 011812.png [ 9.52 KiB | Viewed 475 times ]
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: