| LaserDisc Database https://forum.lddb.com/ |
|
| Looking for LD-X1/S2 part https://forum.lddb.com/viewtopic.php?f=52&t=9373 |
Page 1 of 1 |
| Author: | retro_vegard [ 23 Sep 2020, 13:38 ] |
| Post subject: | Looking for LD-X1/S2 part |
Looking for a power transformator VTT1075 part from a LD-X1/S2 parts player. Or any other player that might be using the VTT1075, haven't found any other players though. - V |
|
| Author: | ambroiseg [ 08 Jan 2021, 12:20 ] |
| Post subject: | Re: Looking for LD-X1/S2 part |
Hi, i'm looking for the same parts. I contacted Kitamura Kiden and Pionner for info. I think then it will be possible to build custom transformers. As I can see on the schematics, it seems to be : VTT1075: 80VA (on the transformer, confirmed by size) : 6-0-6V, 12-0-12V, 0-9V or 0-10V and 5-0-5V but not sure of the last two underlined parameters. I used the schematics but it's quite difficult to know. VTT1076 :20VA (idem) seems to be 0-9V and 0-9V because the power-on voltage (5V) is adding to this voltage once regulated. I'll tell you if I have some news. Kind regards |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|