Trying to troubleshoot this thing..looking for some insight from the experts.
I’ll try to be Concise here…..
Got a U1 error and replaced the belt..that worked.
Now getting E3 error
link to a YouTube video of the problem:
Got E3, disc wouldn’t eject, pulled it apart and manually opened the tray to remove the disc.
Turned the worm gears to move the laser to the backstop of the slider and that seems to re engage the whole mechanism.
Then when I power it back on, the laser will slide toward the front and make a loud click..like it’s hitting..or not stopping when the little white stop switch is supposed to engage.
Now if I don’t insert a disc and power cycle it and open and close the tray it’ll go through its motions fine 9 times out of 10…but that 1 time out of 10 I’ll get an E3 and I’ll have to manually move the laser carriage to the back position to get it come to life again.
If I insert a disc…well, watch the video, the laser makes a weird noise, the video doesn’t start right away and when it does it makes to 12 seconds before randomly jumping back to zero again, all the while, the laser seems to be making weird noises, chapter skip is not possible.
After watching the video, does anyone have any insight as to what I should be looking at
This could also be a bad spot in the movement motor and it needs to be replaced, I have seen that in players. My first guess would have been the position microswitch.
Users browsing this forum: No registered users and 22 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum