It is currently 25 Jun 2022, 05:45




 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: [CLD-99] Laser Sled going too far
PostPosted: 18 May 2022, 15:42 
Shows curiousity
Shows curiousity
User avatar

Joined: 03 Feb 2020, 04:34
Posts: 25
Location: Canada
Has thanked: 1 time
Been thanked: 1 time
Was troubleshooting Side B startup issues (for another time), and video board slipped into cavity on top of main board. Then this happened:

https://drive.google.com/file/d/1KWhElF ... sp=sharing

Is it not tripping a micro switch?
or?
Offline
 Profile  
 
 Post subject: Re: CLD-99 Laser Sled going too far
PostPosted: 18 May 2022, 19:23 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1411
Has thanked: 409 times
Been thanked: 519 times
Something probably shorted. The service position for that board is to hook it onto the clips on the side to keep it from slipping.

Keep everything unplugged and check IC803 inputs. Might be better to check continuity of pins that should not touch on main power supply connector first.
Offline
 Profile  
 
 Post subject: Re: CLD-99 Laser Sled going too far
PostPosted: 20 May 2022, 03:02 
Hardcore fan
Hardcore fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1411
Location: United States
Has thanked: 0 time
Been thanked: 252 times
Yes, you need to measure the micro switches, they can be read at the lines that go from the mechanical assembly and plug into the mainboard. You can do resistance checks by manually pushing each switch and looking for resistance changes with the unit unplugged or actively monitoring the voltages as the laser moves forward.

I have also seen bad movement motor drive IC's on the mainboard cause issues like these.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: