Here's a question maybe someone has some insight on. I picked up a CLD-3080 and I'm really enjoying it. The picture is a bit nicer or at least on-par with my LD-V4400 (the CLD3080 is actually less sharp but in a nice way, if that makes sense) from Jan 1997 but obviously has the nice consumer features (auto flip, jog wheel, digital out, etc) so it will probably become my main player.
However, it has a problem with the tray door where it always boots up into Test Mode unless I press the door in. The door is sort of loose and doesn't completely close and the way to get into test mode on this player is to hold open the tray door, so because of the looseness the door switch thinks the door is always open.
The "fix" I've done is to press in the door when powering on the machine and then taping the door shut while playing discs... not very pretty. I tried watching some discs without taping the door but for some reason, it will stop randomly in the middle of disc. With the door taped up as pictured, discs play perfect start-to-finish on both sides.
I've attached some photos from the service manual of what I THINK is the switch causing this? Or am I way off the mark? Maybe the switch needs to be replaced (or removed?) or there might be some sort of mechanical adjustment on the door I can make to prevent the machine from seeing the door as "open" when it boots up?
More detailed images here
| Attachments: |
|
File comment: picture of my player with tape holding the door shut resizeIMG_0784.JPG [ 35.83 KiB | Viewed 643 times ] |
|
File comment: front panel and door assembly from the service manual and maybe the part in question? resize tray assembly.jpg [ 181.81 KiB | Viewed 643 times ] |
|
File comment: switch in question on the schematic maybe? vsx1014.JPG [ 176.18 KiB | Viewed 643 times ] |
|
File comment: parts list from service manual Inkedparts_LI.jpg [ 263.54 KiB | Viewed 643 times ] |