It is currently 28 Mar 2024, 17:17




 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: [CLD-HF9G] Slow to stop spinning
PostPosted: 18 Oct 2022, 16:25 
Shows curiousity
Shows curiousity
User avatar

Joined: 03 Feb 2020, 04:34
Posts: 31
Location: Canada
Has thanked: 3 times
Been thanked: 4 times
Hey all,

Pioneer CLD-HF9G spins up fine; plays fine; switches to Side B fine.

BUT, takes about 45 seconds to stop spinning, then you can eject disc.
I thought I read somewhere what the problem is and how to fix, but for the life of me, I can't find it again!

Any help would be appreciated.

Thx!
Offline
 Profile  
 
 Post subject: Re: HF9G Slow to stop spinning
PostPosted: 18 Oct 2022, 17:14 
Jedi Knight
Jedi Knight
User avatar

Joined: 14 Jan 2010, 09:44
Posts: 5969
Location: Ann Arbor
Has thanked: 1273 times
Been thanked: 1090 times
Usually that’s an issue with traction at the spindle. When the motor goes into braking mode, if it slips a little at that point, it won’t try again to slow it down so you just have to wait and wait for it to reach an RPM low enough to kick out the drawer.
_________________
All about LD care, inner sleeves, shrink wrap, etc.

https://youtu.be/b3O-vHpHRpM
Offline
 Profile  
 
 Post subject: Re: HF9G Slow to stop spinning
PostPosted: 18 Oct 2022, 21:19 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
isn't that a grip ring issue???
Offline
 Profile  
 
 Post subject: Re: HF9G Slow to stop spinning
PostPosted: 19 Oct 2022, 12:06 
Shows curiousity
Shows curiousity
User avatar

Joined: 03 Feb 2020, 04:34
Posts: 31
Location: Canada
Has thanked: 3 times
Been thanked: 4 times
Right. Grip ring. It's what I thought, just couldn't remember exactly.
Offline
 Profile  
 
 Post subject: Re: HF9G Slow to stop spinning
PostPosted: 19 Oct 2022, 16:09 
Honest fan
Honest fan
User avatar

Joined: 01 May 2022, 00:30
Posts: 66
Location: United States
Has thanked: 34 times
Been thanked: 12 times
HF9G is a Japanese version of CLD-99, so it uses the VEB1237 grip ring. If looking for a replacement I suggest laserparts' replacements: https://www.ebay.com/itm/174686647125
Offline
 Profile  
 
 Post subject: Re: HF9G Slow to stop spinning
PostPosted: 24 Oct 2022, 20:34 
Jedi Knight
Jedi Knight
User avatar

Joined: 14 Jan 2010, 09:44
Posts: 5969
Location: Ann Arbor
Has thanked: 1273 times
Been thanked: 1090 times
IMO if you can’t get an OEM grip ring you can probably make a better one if you are careful/crafty. It’s not like the factory part is any good…
_________________
All about LD care, inner sleeves, shrink wrap, etc.

https://youtu.be/b3O-vHpHRpM
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: