| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-97] Tray removal https://forum.lddb.com/viewtopic.php?f=53&t=10616 |
Page 1 of 1 |
| Author: | cneidle [ 14 Nov 2022, 21:08 ] |
| Post subject: | [CLD-97] Tray removal |
I have a CLD-97 they tray seems to be off track slightly with the right side being about 1mm higher than the left causing they tray to close without asking it to. This gives me a window of about 5 seconds to lay an LD in the tray before it closes up again. (dead link) How can I remove they tray and seat it properly? Or, how can I re-position the tray without removing it? I have tinkered around and I can't seem to find any documentation in the service manual on how to re-seat the tray. |
|
| Author: | rein-o [ 14 Nov 2022, 23:34 ] |
| Post subject: | Re: CLD-97 tray removal |
How did this happen to begin with?? Did you take it apart and put it back wrong, did it get damaged in shipping???? More info pls. |
|
| Author: | cneidle [ 14 Nov 2022, 23:38 ] |
| Post subject: | Re: CLD-97 tray removal |
rein-o wrote: How did this happen to begin with?? Did you take it apart and put it back wrong, did it get damaged in shipping???? More info pls. I bought it this way about a year ago. I did open it up to do the normal maintenance, new belt, greased the rails, and cleaned the lens. Other than that didn't touch anything else. The tray is definitely crooked, but I have no idea how that happened. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|