It is currently 31 Jan 2023, 01:30




 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: [CLD-R7G] Remote needs traces repaired (CU-CLD150)
PostPosted: 25 Nov 2022, 22:59 
True fan
True fan
User avatar

Joined: 09 Jan 2016, 16:42
Posts: 444
Location: Netherlands
Has thanked: 12 times
Been thanked: 86 times
Good evening.

Months ego I got the correct remote for my CLD-R7G.
The problem was that it arrived from Japan with someone spilling a drink on it decades ego.
It would not do anything. After I did deep cleaning of the board with alcohol the remote came back to life.
I did noticed that some of the traces had old corrosion.

After recently picking up the remote again I noticed that a couple of top row buttons simply did not work anymore. Pretty much the bottom part of the remote functions but the top part isn't.

Is there someone in the Netherlands or EU that can do a trace repair or should I try my luck at a electronic repair shop ? On the picture you can see which buttons no longer respond.


Attachments:
s-l1600-1.jpg
s-l1600-1.jpg [ 101.69 KiB | Viewed 531 times ]
_________________
Youtube channel: https://www.youtube.com/channel/UCqIv0_dV3_pjvruObJcukOw
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150)
PostPosted: 25 Nov 2022, 23:50 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 7836
Location: Dullaware
Has thanked: 1079 times
Been thanked: 744 times
Anybody who can use a soldering iron should be able to fix this in their bedroom.

that is IF the traces need to be fixed. Need some thin electronics wire and solder and make new traces etc.
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150)
PostPosted: 26 Nov 2022, 07:43 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1293
Location: San Francisco, CA USA
Has thanked: 346 times
Been thanked: 459 times
You should read my posting about repairing my remotes.....

A tale of two Pioneer remote control repairs

It's going to be a hit or miss but it is doable to fix this issue if you can follow all the traces that are damaged and effectively jump them all.
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150)
PostPosted: 26 Nov 2022, 12:26 
True fan
True fan
User avatar

Joined: 09 Jan 2016, 16:42
Posts: 444
Location: Netherlands
Has thanked: 12 times
Been thanked: 86 times
ldfan wrote:
You should read my posting about repairing my remotes.....

A tale of two Pioneer remote control repairs

It's going to be a hit or miss but it is doable to fix this issue if you can follow all the traces that are damaged and effectively jump them all.


Appreciate it. The bubbling at a few traces is the exact issue I am having.

Will need to get a multi meter and will give it a go.
_________________
Youtube channel: https://www.youtube.com/channel/UCqIv0_dV3_pjvruObJcukOw
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150)
PostPosted: 28 Nov 2022, 17:45 
Advanced fan
Advanced fan
User avatar

Joined: 26 Jun 2019, 06:17
Posts: 521
Location: New Zealand
Has thanked: 125 times
Been thanked: 154 times
Therussian.
If you would like, quite awhile ago now a memeber here from Uzbekistan Jefix sent me a device that reads the codes from remotes which he had me send me the codes from my R7G remote.
Which he used to set up a universal one to access the comb filters etc.
If you end up going down that track if you have no luck let me know.
_________________
CLD-R7G
CLD-D590
VSA-E07 AC3RF+DTS
iScan DUO Processor
Check out my small but loved collection here..
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: