LaserDisc Database https://forum.lddb.com/ |
|
[CLD-R7G] Remote needs traces repaired (CU-CLD150) https://forum.lddb.com/viewtopic.php?f=53&t=10633 |
Page 1 of 1 |
Author: | rein-o [ 25 Nov 2022, 23:50 ] |
Post subject: | Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150) |
Anybody who can use a soldering iron should be able to fix this in their bedroom. that is IF the traces need to be fixed. Need some thin electronics wire and solder and make new traces etc. |
Author: | ldfan [ 26 Nov 2022, 07:43 ] |
Post subject: | Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150) |
You should read my posting about repairing my remotes..... A tale of two Pioneer remote control repairs It's going to be a hit or miss but it is doable to fix this issue if you can follow all the traces that are damaged and effectively jump them all. |
Author: | therussian [ 26 Nov 2022, 12:26 ] |
Post subject: | Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150) |
ldfan wrote: You should read my posting about repairing my remotes..... A tale of two Pioneer remote control repairs It's going to be a hit or miss but it is doable to fix this issue if you can follow all the traces that are damaged and effectively jump them all. Appreciate it. The bubbling at a few traces is the exact issue I am having. Will need to get a multi meter and will give it a go. |
Author: | jakeheke [ 28 Nov 2022, 17:45 ] |
Post subject: | Re: Pioneer CLD-R7G remote needs traces repaired (CU-CLD150) |
Therussian. If you would like, quite awhile ago now a memeber here from Uzbekistan Jefix sent me a device that reads the codes from remotes which he had me send me the codes from my R7G remote. Which he used to set up a universal one to access the comb filters etc. If you end up going down that track if you have no luck let me know. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |