It is currently 28 Mar 2024, 15:56




 Page 1 of 2 [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: [CLD-D701] Multiple issues
PostPosted: 16 Jan 2023, 17:45 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
Hey everyone.. trying to get this guy working. First problem was the tray was not working.. I changed the belt and that is good. The second problem is the A/B mechanism is not turning. The button lights and it moves back to the back but does not do anything. Third and most troubling is the spindle motor is not turning for LD or CD. I tried turning the spindle by hand it is is hard to turn at all. I welcome any thoughts!! Thanks I will also add a video.
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-D701 multiple issues
PostPosted: 16 Jan 2023, 23:04 
True fan
True fan
User avatar

Joined: 06 Jan 2020, 18:00
Posts: 381
Location: United States
Has thanked: 293 times
Been thanked: 41 times
The Pioneer Elite cld-53 I recently bought had issues with opening the door at times and changing to the B side. When I cleaned the belt off it fixed both and now my player will open immediately and turn to side B by itself. However you already replaced the belt on yours so I'm confused on why it's not going to side B.
_________________
CLD-99, CLD-3080, CLD-53, and LX-900
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-D701 multiple issues
PostPosted: 17 Jan 2023, 03:28 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
So I finally got the unit playing. The spindle motor must have had some stuck grease. I spun it manually for 20mins and it broke whatever was sticking it. So it plays perfectly. The last issue remains. It will not flip or go to side b. Here is what happens in order. I press b.. it moves to the back and does notthing. The light moves back to a and everything freezes. I have to unplug to reset it. I added the video.
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-D701 multiple issues
PostPosted: 17 Jan 2023, 19:02 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
jham55 wrote:
it moves to the back and does nothing. The light moves back to a and everything freezes. I have to unplug to reset it.


It does nothing or does it appear to struggle to make the flip and you hear a low level hum before it gives up?
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 18 Jan 2023, 14:31 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
so I got almost everything working. Side b does flip now BUT there must be something off as it sounds and looks like it is going to pull the orange ribbon cable. Is it supposed to twist the ribbon?
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 18 Jan 2023, 17:25 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
The orange cable is folded within a spring retractor to prevent it from bunching up. Is that what you mean by twisting?

This might illustrate it better....

Image

It would be helpful if you post a pick of the issue.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 02:12 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
Thats it! but it isnt in that piece.


Attachments:
IMG_0509.jpg
IMG_0509.jpg [ 72.53 KiB | Viewed 933 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 05:15 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
I mean when the mechanism turn it literally twists the orange ribbon cable. Not sure if I need to undo from the top and re set it.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 06:05 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
So you basically need to re-thread the orange ribbon cable through the retracting mechanism.

Here are some pics showing what a CLD-3070 retractor looks like w/ the cable running through it (B Side). It will be slightly different from the D701 version.

Image

Image

Image


You'll know you have re-threaded it correctly through the retractor as it will keep the cable taut as the laser pick-up moves back and forth. A word of warning; sometimes the spring in the retractor gets displaced and you'll have to re-hook it (see the service manual we have on file for reference).


Last edited by ldfan on 19 Jan 2023, 06:36, edited 3 times in total.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 06:07 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
jham55 wrote:
I mean when the mechanism turn it literally twists the orange ribbon cable. Not sure if I need to undo from the top and re set it.


That makes sense since it's not wound up within the retractor to reduce slack. See my post above.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 18:57 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
This is great thanks. I have to resolder the switch wires. They got pulled out. Also the ribbon does not stay fully in the plastic peice. I will take some pics.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 19:06 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
See the issue in the picture


Attachments:
IMG_0516.jpg
IMG_0516.jpg [ 85.49 KiB | Viewed 896 times ]
IMG_0515.jpg
IMG_0515.jpg [ 119.19 KiB | Viewed 896 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 20:12 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
You have the turnstile flipped the wrong way.

Remove the ribbon cable from the retractor, flip the turnstile 180 degrees, and then re-thread the cable.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 20:49 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
Hmm.. it seems that it twists the cable. Unless I'm also removing it from the clip at the very top.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 20:59 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
Yes… also remove the orange cable from where it’s connected in the plug.

After you are done re-threading it, the ribbon cables should look like this (circled in red)....

Image
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 21:14 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
Man this should be super simple. Not sure what I'm doing wrong but It not twists from the other side. So that is how it looked from the start. Your cable does not twist at all? IS the J on the orange cable on the top or bottom?
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 21:17 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
more pics


Attachments:
IMG_0518(1).jpg
IMG_0518(1).jpg [ 32.75 KiB | Viewed 885 times ]
IMG_0517(1).jpg
IMG_0517(1).jpg [ 30.04 KiB | Viewed 885 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 21:39 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
Ok here is rethreaded maybe.


Attachments:
IMG_0519.jpg
IMG_0519.jpg [ 106.15 KiB | Viewed 879 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 21:56 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
ldfan wrote:
You have the turnstile flipped the wrong way.

Remove the ribbon cable from the retractor, flip the turnstile 180 degrees, and then re-thread the
cable.


Correction on my part (must be old age kicking in); the turnstile was fine the way it is.

Might be easier to re-assemble the entire turn mechanism with none of the ribbons running through it. I think the difficulty is that you have it torn apart and that’s making it harder to picture how the cables run within it.

I would take my player apart to take more pics but I don’t have time to do it right now.
Offline
 Profile  
 
 Post subject: Re: [CLD-D701] Multiple issues
PostPosted: 19 Jan 2023, 22:11 
Knows how to post
Knows how to post
User avatar

Joined: 16 Jan 2023, 17:07
Posts: 12
Location: United States
Has thanked: 0 time
Been thanked: 1 time
Ok here is the disassembled pictures.. lets start over. I just do not know how the orange cable doesnt twist either way. Then how does the orange cable lay.


Attachments:
IMG_0521.jpg
IMG_0521.jpg [ 109.74 KiB | Viewed 871 times ]
IMG_0520.jpg
IMG_0520.jpg [ 129.6 KiB | Viewed 871 times ]
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 2 [ 21 posts ]  Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: