|
It is currently 28 Apr 2024, 04:09
|
View unsolved topics | View unanswered posts
|
|
|
|
ldfan
|
Post subject: Re: Pioneer CLD-D701 multiple issues Posted: 17 Jan 2023, 19:02 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
jham55 wrote: it moves to the back and does nothing. The light moves back to a and everything freezes. I have to unplug to reset it. It does nothing or does it appear to struggle to make the flip and you hear a low level hum before it gives up?
|
|
|
|
|
ldfan
|
Post subject: Re: [CLD-D701] Multiple issues Posted: 18 Jan 2023, 17:25 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
The orange cable is folded within a spring retractor to prevent it from bunching up. Is that what you mean by twisting? This might illustrate it better.... It would be helpful if you post a pick of the issue.
|
|
|
|
|
ldfan
|
Post subject: Re: [CLD-D701] Multiple issues Posted: 19 Jan 2023, 06:05 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
So you basically need to re-thread the orange ribbon cable through the retracting mechanism. Here are some pics showing what a CLD-3070 retractor looks like w/ the cable running through it (B Side). It will be slightly different from the D701 version. You'll know you have re-threaded it correctly through the retractor as it will keep the cable taut as the laser pick-up moves back and forth. A word of warning; sometimes the spring in the retractor gets displaced and you'll have to re-hook it (see the service manual we have on file for reference).
Last edited by ldfan on 19 Jan 2023, 06:36, edited 3 times in total.
|
|
|
|
|
ldfan
|
Post subject: Re: [CLD-D701] Multiple issues Posted: 19 Jan 2023, 06:07 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
jham55 wrote: I mean when the mechanism turn it literally twists the orange ribbon cable. Not sure if I need to undo from the top and re set it. That makes sense since it's not wound up within the retractor to reduce slack. See my post above.
|
|
|
|
|
ldfan
|
Post subject: Re: [CLD-D701] Multiple issues Posted: 19 Jan 2023, 20:59 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
Yes… also remove the orange cable from where it’s connected in the plug. After you are done re-threading it, the ribbon cables should look like this (circled in red)....
|
|
|
|
|
ldfan
|
Post subject: Re: [CLD-D701] Multiple issues Posted: 19 Jan 2023, 21:56 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
ldfan wrote: You have the turnstile flipped the wrong way.
Remove the ribbon cable from the retractor, flip the turnstile 180 degrees, and then re-thread the cable. Correction on my part (must be old age kicking in); the turnstile was fine the way it is. Might be easier to re-assemble the entire turn mechanism with none of the ribbons running through it. I think the difficulty is that you have it torn apart and that’s making it harder to picture how the cables run within it. I would take my player apart to take more pics but I don’t have time to do it right now.
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|