It is currently 29 Mar 2024, 16:13




 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: [CLD-2070] Tray gear assembly order / timing
PostPosted: 14 Feb 2023, 13:10 
First post
First post
User avatar

Joined: 12 Feb 2023, 19:30
Posts: 1
Location: United States
Has thanked: 0 time
Been thanked: 0 time
Hello, I am brand new to the LD community. I recently accquired a CLD-2070 and I dissasembled a large portion of it to troubleshoot an unrelated issue. I decided to completely dissasemble the tray opening/closing mechanism entirely and clean it as well as all the gears, the motor, etc. I have read the adjustment information from the service manual, and it shows roughly the position the gears should be to load the tray if it is removed. However, since I have completely disassembled mine and all the gears, I am needing the specific assembly order/positions to guarantee the correct timing. I would assume there is a standard that was meant to be used during manufacturing, but I am struggling to find any info online. Below I've posted a pic of the specific parts I am talking about.


Attachments:
20230214_130527.jpg
20230214_130527.jpg [ 149.1 KiB | Viewed 431 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-2070] Tray gear assembly order / timing
PostPosted: 15 Feb 2023, 00:37 
Hardcore fan
Hardcore fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1516
Location: United States
Has thanked: 0 time
Been thanked: 337 times
Same procedure as the CLD-3070 which is in the manuals section

https://manuals.lddb.com/LD_Players/Pioneer/CLD/CLD-3070/
Offline
 Profile  
 
 Post subject: Re: [CLD-2070] Tray gear assembly order / timing
PostPosted: 03 Nov 2023, 03:03 
Second post
Second post
User avatar

Joined: 01 Nov 2023, 08:43
Posts: 2
Location: United States
Has thanked: 0 time
Been thanked: 0 time
klaymonator wrote:
Hello, I am brand new to the LD community. I recently accquired a CLD-2070 and I dissasembled a large portion of it to troubleshoot an unrelated issue. I decided to completely dissasemble the tray opening/closing mechanism entirely and clean it as well as all the gears, the motor, etc. I have read the adjustment information from the service manual, and it shows roughly the position the gears should be to load the tray if it is removed. However, since I have completely disassembled mine and all the gears, I am needing the specific assembly order/positions to guarantee the correct timing. I would assume there is a standard that was meant to be used during manufacturing, but I am struggling to find any info online. Below I've posted a pic of the specific parts I am talking about.


Did this ever get solved? Im in the same boat but manuals dont see to help
Offline
 Profile  
 
 Post subject: Re: [CLD-2070] Tray gear assembly order / timing
PostPosted: 03 Nov 2023, 16:03 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
While I've never done this extreme of an operation on any player, I have heard there are holes or some type of markings
on the gears that you need to make sure are lined up before you put it together.
Offline
 Profile  
 
 Post subject: Re: [CLD-2070] Tray gear assembly order / timing
PostPosted: 04 Nov 2023, 22:54 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
This is actually the best resource we have on the 2070/3070 loading assembly. Give cpluplus a big thanks for it. I forgot we had this.....

[CLD-2070][CLD-3070][CLD-91][CLD-92] Loading Disassembly
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: