LaserDisc Database
https://forum.lddb.com/

[CLD-2070] Tray gear assembly order / timing
https://forum.lddb.com/viewtopic.php?f=53&t=10784		 Page 1 of 1
Author:  klaymonator [ 14 Feb 2023, 13:10 ]
Post subject:  [CLD-2070] Tray gear assembly order / timing
Hello, I am brand new to the LD community. I recently accquired a CLD-2070 and I dissasembled a large portion of it to troubleshoot an unrelated issue. I decided to completely dissasemble the tray opening/closing mechanism entirely and clean it as well as all the gears, the motor, etc. I have read the adjustment information from the service manual, and it shows roughly the position the gears should be to load the tray if it is removed. However, since I have completely disassembled mine and all the gears, I am needing the specific assembly order/positions to guarantee the correct timing. I would assume there is a standard that was meant to be used during manufacturing, but I am struggling to find any info online. Below I've posted a pic of the specific parts I am talking about.

Attachments:
20230214_130527.jpg
20230214_130527.jpg [ 149.1 KiB | Viewed 555 times ]
Author:  krbahr [ 15 Feb 2023, 00:37 ]
Post subject:  Re: [CLD-2070] Tray gear assembly order / timing
Same procedure as the CLD-3070 which is in the manuals section

https://manuals.lddb.com/LD_Players/Pioneer/CLD/CLD-3070/
Author:  mg42 [ 03 Nov 2023, 03:03 ]
Post subject:  Re: [CLD-2070] Tray gear assembly order / timing
klaymonator wrote:
Hello, I am brand new to the LD community. I recently accquired a CLD-2070 and I dissasembled a large portion of it to troubleshoot an unrelated issue. I decided to completely dissasemble the tray opening/closing mechanism entirely and clean it as well as all the gears, the motor, etc. I have read the adjustment information from the service manual, and it shows roughly the position the gears should be to load the tray if it is removed. However, since I have completely disassembled mine and all the gears, I am needing the specific assembly order/positions to guarantee the correct timing. I would assume there is a standard that was meant to be used during manufacturing, but I am struggling to find any info online. Below I've posted a pic of the specific parts I am talking about.


Did this ever get solved? Im in the same boat but manuals dont see to help
Author:  rein-o [ 03 Nov 2023, 16:03 ]
Post subject:  Re: [CLD-2070] Tray gear assembly order / timing
While I've never done this extreme of an operation on any player, I have heard there are holes or some type of markings
on the gears that you need to make sure are lined up before you put it together.
Author:  ldfan [ 04 Nov 2023, 22:54 ]
Post subject:  Re: [CLD-2070] Tray gear assembly order / timing
This is actually the best resource we have on the 2070/3070 loading assembly. Give cpluplus a big thanks for it. I forgot we had this.....

[CLD-2070][CLD-3070][CLD-91][CLD-92] Loading Disassembly
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/