LaserDisc Database https://forum.lddb.com/ |
|
[CLD-97] Needs to "warm up" https://forum.lddb.com/viewtopic.php?f=53&t=10826 |
Page 1 of 1 |
Author: | elahrairrah [ 20 Mar 2023, 18:56 ] |
Post subject: | [CLD-97] Needs to "warm up" |
I've got this CLD-97 that will, if left off for a day or two, will need to "warm up" before playing a CLV disc. By warming up, I mean it will play a CAV disc without issue normally. If you try to play a CLV disc, it will start but then stop after a few minutes with no error code. If you let it play a CAV disc for one side for 20 min or so, then put in a CLV disc, it then works normally. Sometimes it will stop while playing a CAV disc too on the first try, but will work when restarted. Any idea what's causing this? Is the spindle going bad or something (hopefully) less drastic? |
Author: | jd213 [ 21 Mar 2023, 14:53 ] |
Post subject: | Re: CLD-97 Needs to "warm up" |
Might be a sign that some of the capacitors are bad. |
Author: | ldfan [ 21 Mar 2023, 17:25 ] |
Post subject: | Re: CLD-97 Needs to "warm up" |
I was thinking the same as well. If the spindle is actually going bad, you probably couldn't play any discs. How does it deal w/ CD playback? |
Author: | elahrairrah [ 27 Mar 2023, 14:32 ] |
Post subject: | Re: [CLD-97] Needs to "warm up" |
I tried playing a CD in it. Starts up fine, but when I tried to skip to the next track it stopped. |
Author: | signofzeta [ 27 Mar 2023, 15:13 ] |
Post subject: | Re: [CLD-97] Needs to "warm up" |
Almost anything that needs to warm up probably needs caps. In a system this complex though…it’s hard to say where. Probably not in the PSU though, would be my guess. When playing well, is the picture good? |
Author: | krbahr [ 27 Mar 2023, 22:57 ] |
Post subject: | Re: [CLD-97] Needs to "warm up" |
Warming up and failing is also a common issue with IC's or semiconductors. Get freeze spray and try spraying IC's to see if you can keep it working. |
Author: | elahrairrah [ 28 Mar 2023, 17:28 ] |
Post subject: | Re: [CLD-97] Needs to "warm up" |
signofzeta wrote: Almost anything that needs to warm up probably needs caps. In a system this complex though…it’s hard to say where. Probably not in the PSU though, would be my guess. When playing well, is the picture good? The picture is a-ok. No complaints there. No snow or interference. |
Author: | elahrairrah [ 28 Mar 2023, 17:30 ] |
Post subject: | Re: [CLD-97] Needs to "warm up" |
krbahr wrote: Warming up and failing is also a common issue with IC's or semiconductors. Get freeze spray and try spraying IC's to see if you can keep it working. Any particular place I should aim on the IC's when it's playing a CLV disc to keep it going? |
Author: | krbahr [ 29 Mar 2023, 00:39 ] |
Post subject: | Re: [CLD-97] Needs to "warm up" |
Flip out the top video board to access the main board for the main board IC's to spray. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |