| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-D503] Player spins up disc but stops after a few second https://forum.lddb.com/viewtopic.php?f=53&t=10838 |
Page 1 of 1 |
| Author: | iriahian88j [ 05 Apr 2023, 00:20 ] |
| Post subject: | [CLD-D503] Player spins up disc but stops after a few second |
Greetings, First timer here! Got an issue that I need some help with. Used my player one day just fine. Next day I open the tray and I hear a grinding noise. I opened up the case and pressed the eject button again. Saw that the drive for the lense was stuck. So I very gently rocked it back and fourth while ejecting and it started working again! I go to put in a movie and it will spin up for 15 or so seconds then the display says stop and it spins the disc down. What do I need to do to get my baby working again? Any help is appreciated. Thank you!!! |
|
| Author: | krbahr [ 05 Apr 2023, 01:28 ] |
| Post subject: | Re: [CLD-D503] Player spins up disc but stops after a few se |
Go on eBay and buy a VEB1237 grip ring. Probably slipping so much the disc is not reaching proper rotation to read the information from the disc. |
|
| Author: | admin [ 05 Apr 2023, 03:12 ] |
| Post subject: | Re: [CLD-D503] Player spins up disc but stops after a few se |
iriahian88j wrote: I go to put in a movie and it will spin up for 15 or so seconds then the display says stop and it spins the disc down. What do I need to do to get my baby working again? Any error code on the display? [IMPORTANT] List of Pioneer Error Codes Julien |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|