| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-D504] Laser Assembly E3 Error https://forum.lddb.com/viewtopic.php?f=53&t=10875 |
Page 1 of 1 |
| Author: | shannyd [ 13 May 2023, 23:23 ] |
| Post subject: | [CLD-D504] Laser Assembly E3 Error |
It's as stated above. The laser assembly gets stuck on startup and has issues traveling on the track, hence the E3 error code. It's definitely a slider error but I can't figure out why it's doing what it's doing. The laser assembly looks like a car stuck in mud. The motor and gears are moving but the assembly itself won't budge. Anybody got any insight? |
|
| Author: | crashoveride [ 14 May 2023, 01:53 ] |
| Post subject: | Re: Pioneer CLD-D504 Laser Assembly E3 Error |
Might be the M-Holder is broken on the laser assembly and is preventing the gears from moving, if you're able you should post some pictures/video |
|
| Author: | shannyd [ 14 May 2023, 04:31 ] |
| Post subject: | Re: Pioneer CLD-D504 Laser Assembly E3 Error |
It's dorky cause I just replaced the m-holder cause the original broke. I thought it would have resolved the e3 issue but :c Anyhow here's a video of what it's doing. It looks to be kind of struggling when trying to reach the spindle. I think the reason the previous m-holder broke was due to se tension with the gears. Dunno if this is normal. I used some residual grease in the machine on the track on gears but still no luck. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|