| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-D925] C904 specs https://forum.lddb.com/viewtopic.php?f=53&t=10943 |
Page 1 of 1 |
| Author: | doublecee [ 21 Jul 2023, 17:18 ] |
| Post subject: | [CLD-D925] C904 specs |
HI ALL Whilst replacing a few bad caps that tested way below spec on the ESR meter, Ceramic Cap at C904 on PCB 3 cracked and then split. Im struggling to work out what its value is, as it doesnt appear to be marked in any way. The service manual lists it as CKSQYF104Z25 I'm leaning towards 0.1UF 25V, but wanted to run this by the forum for clarification. |
|
| Author: | krbahr [ 23 Jul 2023, 02:42 ] |
| Post subject: | Re: [CLD-D925] C904 specs |
104 means 1.0pf plus 4 zeros after that or 1000pf, the 25 at the end is normally the voltage rating. The other letter are the series/type and precision of the part. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|